PropDD

Force Index for Prop Firm Traders: Settings, Signals and Volume-Backed Entries That Survive Drawdown

By Remi Robin · Updated · 13 min read · Indicators

Force index oscillator 2/13 EMA settings chart with volume bars for prop firm traders

It was a Thursday afternoon in October and EURUSD was falling for the fifth hour in a row. My RSI read 28 — “oversold,” the book says — and everything in me wanted to buy the dip. I bought. It fell another 35 pips. Then it fell another 20. My stop got taken out and the pair bounced an hour later without me. That evening, instead of blaming the market, I asked a different question: who was actually behind the move? Price alone could not answer it. So I added the one ingredient my chart was missing — volume — and found the indicator that finally answers that question: the force index.

In this article
  1. What the force index actually measures
  2. The formula, worked by hand
  3. Best settings for prop-firm trading
  4. How I read its four signals
  5. A worked trade: EURUSD with 0.5%-risk sizing
  6. I tested it: 10 force-index trades on a demo
  7. The mistakes that cost me money
  8. How the force index fits prop firm rules
  9. Frequently asked questions

The force index is not a fashion statement. It was built by Alexander Elder, the psychiatrist-turned-trader who wrote Trading for a Living, and it does something most oscillators refuse to do: it weights every price change by the volume behind it. A 20-pip move on heavy volume is strong. The same 20 pips on dead volume is noise wearing a costume. On a funded account, where every entry spends a slice of your daily loss budget, knowing which one you are looking at is not optional. Here is my full playbook: what the force index measures, the formula worked by hand, the settings that survive prop-firm conditions, how I read its four signals, a worked trade with real position-sizing maths, and the guardrails that keep every force-index trade inside the firm’s rules.

What the force index actually measures

Think of each candle as a push. Price tells you the distance of the push — close minus previous close. Volume tells you the weight behind it. The force index multiplies the two. A big green candle on huge volume prints a large positive force index: bulls pushed hard and a crowd pushed with them. A big red candle on huge volume prints a large negative number: the sellers are serious. A long candle on thin volume prints a small number, which is the indicator’s polite way of saying “this move has no conviction, treat it as decoration.”

That multiplication is the whole edge. Most momentum indicators — RSI, stochastic, MACD — are pure price mathematics. They will happily call a move “strong” when three traders and a bored algorithm pushed it 30 pips at 3am. The force index refuses. No volume, no force. For a prop-firm trader this distinction is money, because entering on conviction-less moves is the single fastest way to spend your daily loss limit on chop.

On your platform the force index is a single oscillating line with a zero line in the middle, and you will find it built into MT4 and MT5 under the oscillators menu — no custom download needed. Raw values swing wildly bar to bar, so in practice everyone reads smoothed versions of it. Which smoothing is where the real craft lives, and that is exactly what the settings section below is for.

The formula, worked by hand

I do not trade an indicator I cannot compute on a napkin. The force index formula is one of the simplest in technical analysis — two steps, as a force index formula reference documents it:

Step Formula Plain English
1. Raw force Force Index = Volume × (Close − Previous close) How far price moved, weighted by how many traders moved it
2. Smooth it Force Index(2) = 2-period EMA of raw force; Force Index(13) = 13-period EMA of raw force The 2-EMA finds entries, the 13-EMA finds the trend

And here is a three-candle hand calculation on EURUSD H1, tick volume in thousands, to prove the numbers behave the way the theory says:

Candle Close Previous close Δ price Volume (ticks) Raw force index
1 1.09420 1.09350 +0.00070 82,000 82,000 × 0.00070 = +57.4
2 1.09380 1.09420 −0.00040 41,000 41,000 × −0.00040 = −16.4
3 1.09310 1.09380 −0.00070 96,000 96,000 × −0.00070 = −67.2

Read the story those three numbers tell. Candle 1 pushed up 7 pips on 82k ticks of volume: strong bullish force, +57.4. Candle 2 drifted down 4 pips on only 41k ticks: −16.4, a weak counter-move, the kind of pullback you buy, not fear. Candle 3 dropped 7 pips on 96k ticks: −67.2, the heaviest force of the three and pointing down — the bears just took control. Price alone showed “up 7, down 4, down 7,” a coin flip. Volume-weighted, it showed a takeover. That is the force index doing its job.

Best settings for prop-firm trading

Alexander Elder’s original recipe uses two settings, and on a funded account I run them exactly as he wrote them — because the whole system only works when the two timeframes disagree on purpose:

Setting Role Why it fits a funded account
Force Index(2) Entry timing — the 2-period EMA of raw force Fast enough to catch pullback entries, slow enough to ignore single-bar spikes
Force Index(13) Trend direction — the 13-period EMA of raw force Keeps you out of counter-trend trades, which is where daily loss limits go to die
Force Index(50) (optional) Higher-timeframe filter on H4/D1 One glance at whether the bigger picture agrees before you risk the day’s budget

The routine that goes with them is the part most traders skip. Elder’s classic rule: only take Force Index(2) entries in the direction the Force Index(13) is pointing. 13-EMA rising above zero — I only buy pullbacks (2-EMA dipping negative). 13-EMA falling below zero — I only sell rallies (2-EMA popping positive). The 13-EMA is the boss; the 2-EMA is the scout. When the 13-EMA is flat and hugging the zero line, there is no trend to trade — that flat line is a “do not trade” sign, and obeying it is what separates a funded trader from a gambler.

One setting note for MT5 users: forex has no central volume, so the platform feeds you tick volume (quote changes per bar). Purists complain about this. I tested it for two months and the signals held up fine — tick volume tracks real futures volume closely enough for a volume-weighted oscillator, and every “I tested it” table in this article uses the standard MT5 tick-volume feed, exactly what a funded trader sees.

How I read its four signals

The force index only ever gives you four things to read. Learn them in this order and you will never stare at the line wondering what it means:

Signal What you see What I do
1. Trend filter 13-EMA rising above zero / falling below zero Trade long only / short only — never against it
2. Entry trigger 2-EMA dips negative in an uptrend (or pops positive in a downtrend) Plan the entry at the next bar, with the stop already priced
3. New force extremes 13-EMA makes a new high (or new low) with price Bulls/bears are strengthening — hold the trend, trail the stop
4. Divergence Price makes a new high but the 13-EMA makes a lower high The crowd is thinning — tighten the stop, no new entries, consider exiting

Signal 4 deserves a warning label, because divergence is the signal beginners fall in love with and veterans treat like a smoke alarm. A bearish divergence does not mean “short now” — it means the uptrend is losing its crowd, so you stop adding risk and protect what you have. I have watched divergence print three times before price finally turned, and each early short was a donation. Divergence manages exits and stops; it does not trigger entries. Entries belong to signal 2, taken only in signal 1’s direction.

There is also a fifth, silent signal: the 13-EMA going sideways on the zero line. That is the market saying “no force anywhere.” Chop. On a prop account, chop is not neutral — every chop trade pays spread and commission while rolling dice, and three of those in a morning is how you breach before lunch. I treat a flat force index as a hard no-trade filter, right next to my personal daily stop.

A worked trade: EURUSD with 0.5%-risk sizing

Here is a real-pattern example, built on the Thursday setup that opened this article — except this time with the force index on the chart. EURUSD H1, 13-EMA of the force index rising above zero since the London open: uptrend confirmed. Price pulls back 25 pips into the 1.0920 area and the 2-EMA of the force index dips negative: the pullback has no crowd behind it, which is exactly the entry Elder describes.

Step Maths Result
Account + risk budget $50,000 × 0.5% $250 risk on this trade
Entry 1.09320 (after the 2-EMA dip confirms) Long EURUSD
Stop 1.09020 — 30 pips, below the pullback low and the session low 30 pips risked
Position size $250 ÷ (30 pips × $10/pip) 0.83 lots
Target 1.5R = 45 pips → 1.09770 +$375 if hit
Daily-budget check $250 ÷ $2,500 daily loss limit 10% of the day’s budget — one trade cannot breach the day

The full version of this sizing method — including how I size gold and indices, where pip values differ — is in my ATR position-sizing guide. The point of the table is the discipline it encodes: the stop is placed before the size is computed, the size is derived from the stop, and the daily-budget check happens before the order goes in. An indicator tells you when. The sizing table tells you how much. You need both, and the second one matters more.

I tested it: 10 force-index trades on a demo

Theory is cheap, so I ran the 2/13 system for two weeks on a demo account and logged every trade: H1 EURUSD and GBPUSD, London/New York sessions only, 0.5% risk per trade, personal daily stop at −$500, and the flat-zero-line no-trade filter enforced. Every entry needed the 13-EMA trend filter plus the 2-EMA trigger — no filter, no trade, even when the setup looked tempting.

# Pair Direction 13-EMA trend Entry Result (R)
1 EURUSD Long Rising 2-EMA dip +1.8
2 GBPUSD Short Falling 2-EMA pop +2.2
3 EURUSD Long Rising 2-EMA dip −1.0
4 GBPUSD Long Rising 2-EMA dip +1.4
5 EURUSD Short Falling 2-EMA pop −1.0
6 EURUSD Long Rising 2-EMA dip +1.6
7 GBPUSD Short Falling 2-EMA pop +2.0
8 EURUSD Short Flat → skipped — 0.0 (no trade)
9 GBPUSD Long Rising 2-EMA dip −1.0
10 EURUSD Long Rising 2-EMA dip +1.2

Nine trades taken, one skipped (trade 8: the 13-EMA was flat on zero, and price chopped 20 pips both ways all morning — the filter saved a coin flip). Six wins, three losses: 66.7% win rate. Winners averaged +1.70R, losers −1.0R, so the net is (6 × 1.70) − (3 × 1.0) = 10.2 − 3.0 = +7.2R, about +$1,800 at $250 risk per trade. I rechecked every row before writing this: the totals match the log exactly. The honest caveat is the same one I put on every test log — nine trades is a diary, not a backtest. But the pattern held: the losses were all clean 1R stops, and the biggest winner (+2.2R) came from the trend-filtered entry, not a guess.

The mistakes that cost me money

I paid for this section in real drawdown before I learned it on demo, so read it as tuition already paid. First: trading the 2-EMA alone. It is fast, it is exciting, and in chop it will hand you five entries in an hour, four of them losers. The 13-EMA filter is not a suggestion — it is the difference between a system and a slot machine. Second: taking entries when the 13-EMA is flat near zero. I have done this. The market drifted 15 pips up, 18 down, and my “signal” was just volume noise. Third: ignoring divergence exits. Twice I watched a bearish divergence print on a long, told myself the trend was fine, and gave back the whole winner plus a stop. The force index warned me both times; I chose not to listen.

Fourth, and most prop-firm-specific: using the force index to justify revenge trading. After a stopped trade, the next 2-EMA dip looks like redemption. It is not — it is a fresh trade that must pass the same filters, and if you are already near your personal daily stop, the correct action is to close the laptop. My risk-per-trade guide covers the maths of why one more trade rarely fixes the day; the short version is that drawdown compounds faster than confidence recovers.

How the force index fits prop firm rules

Every indicator on a funded account has to answer one question: does it help you obey the rules, or does it tempt you to break them? The force index passes this test on all four rules that matter:

Prop firm rule How the force index helps
Daily loss limit The flat-zero-line filter deletes chop trades — the trades that silently eat a daily budget. Fewer entries, cleaner entries.
Consistency rule (best-day %) Trend-filtered entries produce similar-sized trades instead of lottery tickets — my test log’s winners clustered at 1.2–2.2R, which is exactly what the consistency rule rewards.
News / volatility restrictions Force index spikes on news volume tell you when the crowd is panicking — a reason to stand aside, not a reason to enter.
No martingale / no doubling Fixed 0.5%-risk sizing per signal means a losing streak costs 1R per trade — check the maths against the max daily drawdown calculator before you start.

One honest limitation to file away: the force index is a timing and conviction tool, not a complete strategy. It tells you when the crowd is behind a move and when the crowd is leaving. It does not pick targets, manage trailing stops, or decide your session filters — those come from your plan. Pair it with a session rule (I only trade London and New York), a fixed risk fraction, and a daily stop, and it earns its place on the chart. Without those, it is just another pretty line.

Frequently asked questions

Which timeframe works best for the force index on a funded account?

H1 and H4 for the 13-EMA trend filter, H1 (or M30) for the 2-EMA entries. Below M15, tick-volume noise makes the 2-EMA jumpy and the flat-zero filter fires constantly. The 13/2 pair was designed on daily charts by Elder, and it behaves best when each bar represents a real chunk of the session, not a coffee break.

Does the force index work on forex if volume is only tick volume?

Yes, well enough to trade on. Tick volume counts quote changes per bar, and multiple studies show it tracks real futures volume closely. My own two-week test log above used the standard MT5 tick-volume feed — the signals, filters and results all held. Do not let the perfect be the enemy of the tradeable.

What is the difference between the force index and OBV?

Both use volume, but OBV is cumulative — it keeps a running total that drifts upward forever in an uptrend and tells you little about this bar. The force index measures per-bar force, so it resets every candle and shows conviction right now. If you already read my OBV guide, think of OBV as the tide and the force index as the current under your boat.

Why not just use the 2-period setting alone?

Because alone it is a noise amplifier. The 2-EMA flips sign on almost every counter-move, which in chop means an entry signal every few bars. Elder designed the system as a pair: the 13-EMA decides the direction, the 2-EMA picks the moment. Every losing streak in my early testing came from dropping the 13-EMA filter “to catch more moves.”

Can I trade only divergences?

I would not. Divergence tells you the crowd is thinning, not that the trend is over — price can diverge and keep marching for days. Use divergence to tighten stops and stop adding risk, never as an entry trigger. Entries come from the 2-EMA pullback signal inside the 13-EMA trend, full stop.

Should I use the force index during high-impact news?

No — stand aside. News candles print enormous volume and enormous force index spikes, but that force is panic, not a trend you can join. Most prop firms restrict or forbid news trading anyway. Let the spike fade, wait for the 13-EMA to settle into a direction, and re-enter on the next clean pullback.

Risk disclaimer: trading forex and CFDs on leverage carries a high risk of losing money, and most retail traders lose. Nothing here is financial advice — the examples are from my own demo testing for education, and you should never risk money you cannot afford to lose.

Check your own numbers

Use the free max daily drawdown calculator before your next trading session.

Open the calculator

Join the discussion

Your email address will not be published. Please keep it respectful and on topic. Links are not allowed.

Recent articles

Remi Robin
About the author

Remi Robin

Independent forex trader and writer

I've been trading forex and CFDs since 2012, mostly through prop firm challenges — that's where I learned the hard way that risk rules matter more than entries. I write these guides to document what actually worked for me, with real numbers instead of hype. Everything here is educational; I trade my own plan, and you should build yours.

More about this site →