PropDD

Ulcer Index on a Funded Account: The Drawdown Gauge That Tells Me How Much Pain a Pair Is Already Carrying

By Remi Robin · Updated · 17 min read · Indicators

Ulcer index drawdown gauge falling recovery entry stop target chart for funded traders

I bought the dip three times in one week and all three dips kept dipping. GBPUSD had fallen off a swing high, each bounce looked like the turn, and each time I told myself the pair was oversold enough to be cheap. It was not cheap. It was in pain, and I was buying into the pain instead of waiting for the pain to end. By Friday I was down 1,700 dollars on a 100,000-dollar funded account — more than a third of my 5,000-dollar daily loss limit, spent across a single week on a single idea that never once confirmed itself.

In this article
  1. What the Ulcer Index actually measures
  2. The formula, worked bar by bar
  3. The settings I use on a funded account
  4. How to read its signals
  5. The worked trade: buying the recovery, not the dip
  6. Position sizing under the daily loss limit
  7. I tested it: 12 trades with the falling-index filter
  8. Common mistakes with the Ulcer Index
  9. How it fits prop firm rules
  10. My daily Ulcer Index routine
  11. Frequently asked questions

The following Monday I added one line to the chart that I had never used: the Ulcer Index. It does not measure momentum, volume or trend direction. It measures how deep a pair’s recent drawdowns have been and how long they have lasted — the two things that actually hurt a funded account. When I looked back at that losing week, the Ulcer Index had climbed from 1.2 to 4.1 while I was buying. Every one of my three entries had gone in while the gauge was rising. I had been trading against the one reading that was telling the truth.

This is the guide I wish I had read before that week: what the Ulcer Index measures, its exact formula worked bar by bar, the settings I use on a funded account, and the sizing maths that keep an Ulcer Index trade inside the daily limit.

What the Ulcer Index actually measures

The Ulcer Index, usually shortened to UI, answers one question: how much drawdown pain is this market already carrying? It was created by Peter Martin and Byron McCann in the late 1980s for fund investors who wanted a single number for downside risk, and it works just as well on a funded trading account, because a funded account fails on drawdowns, not on missed entries.

The index tracks every close inside a lookback window and compares it with the highest close in that window. A close at a new high scores zero — no pain at all. A close below the highest close scores the percentage it has fallen. The deeper the fall and the longer it lasts, the higher the index climbs. That combination of depth and duration is what makes it different from every other indicator on my chart. A volatility gauge tells me how far price swings. A momentum gauge tells me how fast it moves. The Ulcer Index tells me how long traders in this pair have been underwater, which is the closest thing to a stress reading a chart can give.

Two properties matter more than anything else. First, the index is a regime gauge, not an entry trigger. A high reading does not mean “buy now because it must bounce”, and a low reading does not mean “buy now because it is safe”. It tells you the state of the market you are about to trade in. Second, the index resets hard when price makes a new high. A fresh high wipes the drawdown history inside the window, and the reading collapses. That reset is the confirmation I wait for.

On a funded account that distinction is the whole game. Your daily loss limit does not care that a pair looks cheap. It cares whether you keep adding risk into a market that is still falling, and the Ulcer Index is the one line that shows you that behaviour while it is happening.

The formula, worked bar by bar

The formula has three steps and no hidden parameters. Over a lookback of N periods, for each bar you take the percentage drawdown from the highest close in the window, square it, average the squares, and take the square root. Capital.com’s Ulcer Index guide works the same three steps with a five-period example, which is a useful cross-check if you want to verify a script’s maths before trusting it:

Step Calculation What it shows
1 Drawdown = ((Close – Highest close in N periods) / Highest close) x 100 How far this bar sits below the window high, in percent
2 Squared average = Sum of squared drawdowns / N The average pain, with deep drawdowns weighted harder because of the squaring
3 Ulcer Index = Square root of the squared average The final reading, back on the same scale as the original percentages

The squaring is the clever part. A 1 percent drawdown contributes 1 to the sum. A 2 percent drawdown contributes 4. A 4 percent drawdown contributes 16. Deep drawdowns are punished far more than shallow ones, which matches how a funded account actually feels: one 4 percent hole hurts more than four separate 1 percent dips, because the deep hole is the one that trips the daily limit.

Here is the formula worked over 14 EURUSD hourly bars, with the window high starting at 1.1000:

Bar Close Highest close in window Drawdown (percent) Drawdown squared
1 1.1000 1.1000 0.00 0.00
2 1.0980 1.1000 -0.18 0.03
3 1.0940 1.1000 -0.55 0.30
4 1.0900 1.1000 -0.91 0.83
5 1.0920 1.1000 -0.73 0.53
6 1.0880 1.1000 -1.09 1.19
7 1.0860 1.1000 -1.27 1.62
8 1.0890 1.1000 -1.00 1.00
9 1.0910 1.1000 -0.82 0.67
10 1.0930 1.1000 -0.64 0.41
11 1.0950 1.1000 -0.45 0.21
12 1.0970 1.1000 -0.27 0.07
13 1.0990 1.1000 -0.09 0.01
14 1.1010 1.1010 0.00 0.00

Sum of squared drawdowns: 6.86. Divide by 14 bars: 0.49. Square root: 0.70. So the Ulcer Index reads 0.70 at the end of this window — a calm reading, because the pair spent the second half of the window climbing back to a new high and the drawdown history washed out. If the pair had instead stayed near 1.0860 for all 14 bars, the reading would have sat near 1.27 for the whole window. Same depth, longer duration, higher index. That is exactly the behaviour I want a drawdown gauge to show.

The settings I use on a funded account

The standard lookback is 14 periods, and I keep it. Shorter lookbacks make the index jump on every small dip, which turns a regime gauge into noise. Longer lookbacks make it so slow that the pain is over before the reading reacts. Fourteen is the setting the indicator was designed around, and on a funded account I would rather use the standard setting than a clever one I cannot compare with anyone else’s readings.

Where I use it Timeframe Lookback Job
Regime check Daily 14 Decides whether the pair is tradeable this week at all
Entry timing H1 14 Confirms the pullback pain is fading before I buy
Account circuit breaker Daily equity curve 14 Measures my own drawdown pain, not the pair’s
What I avoid M1 and M5 Any Too noisy — every small dip spikes the reading and the gauge stops meaning anything

The third row is the one most traders never try, and it is the one that has saved my account the most. I run the same 14-period calculation on my own daily equity curve: each day’s balance against the highest balance of the last 14 days. When my personal Ulcer Index climbs, it means my account has been sitting in drawdown for days, and that is when I am most likely to force a trade. A rising equity Ulcer Index is my signal to halve size or stop for the day, before the daily limit has to do it for me.

One practical note: most charting platforms do not ship the Ulcer Index as a built-in indicator, so I use a community script and I check it against the formula above before trusting it. If a script’s reading does not fall to zero on a new window high, it is not calculating the Ulcer Index, and I delete it.

How to read its signals

The index has no overbought or oversold line, and anyone selling you one is guessing. What it has is direction, level and reset, and I read all three together:

What the index is doing What it means What I do
Falling while price rises Healthy trend — drawdown pain is shrinking as price climbs Normal trading; pullbacks inside this state are my best entries
Rising while price falls Pain is building — the move down is deepening or dragging on No dip-buying; I wait, whatever the momentum gauges say
High and flat Prolonged drawdown — price stuck well below its window high Stand aside or trade the range only, with half size
Collapsing after a new high Reset — the drawdown history just washed out Strongest confirmation in the toolkit; trend trades get full size again
Rising while price rises Divergence warning — price up, but on weakening closes inside the window Tighten stops; do not add to winners

On forex pairs, where daily moves are measured in fractions of a percent, my working bands are lower than the ones stock traders quote. Below 1.0 reads calm to me. Between 1.0 and 3.0 reads stressed — tradeable, but only with confirmation. Above 3.0 reads severe — the pair has been in real pain, and I do not buy dips there at all. These are my own working bands from watching EURUSD and GBPUSD, not universal constants, and you should calibrate yours on the pairs you actually trade before sizing anything on them.

The rule that ties it together is simple: I only buy a pullback when the index is falling. A falling index means the worst of the drawdown is behind the pair. A rising index means the worst may still be ahead, and buying into it is how my losing week happened. I pair this with the volume profile for levels and the RSI for timing, but the Ulcer Index has veto power over both: if it is rising steeply, I do not take the trade.

The worked trade: buying the recovery, not the dip

Here is a trade from a week after my losing streak, on EURUSD, with the same 100,000-dollar funded account and the same 5,000-dollar daily loss limit. The pair had pulled back from 1.1000 to 1.0860, the Ulcer Index had peaked near 2.8, and then it started falling as price climbed back through 1.0900. I did not buy the low at 1.0860. I bought the recovery, once the index confirmed the pain was fading:

Trade detail Value
Entry 1.0920, after the Ulcer Index fell from 2.8 to 1.9 and price reclaimed 1.0900
Stop loss 1.0880, below the pullback low region, 40 pips of risk
Position size 500 dollars risk / (40 pips x 10 dollars per pip per lot) = 1.25 lots
First target 1.0960, plus 500 dollars, 1R — I bank half here
Second target 1.1000, plus 1,000 dollars, 2R — the old window high, where the index resets
Risk as share of daily limit 500 / 5,000 = 10 percent of the day’s room on one trade

The trade hit the first target, then the second. The full 2R outcome was plus 1,000 dollars, and the Ulcer Index collapsed toward zero as price printed the new high at 1.1000 — the reset I described earlier, happening live on the chart. Compare that with my losing week: same pair behaviour, same dip, but entries taken while the index was rising instead of falling. The entry price was barely different. The regime was completely different, and the regime was the trade.

If the stop had been hit instead, the loss would have been 500 dollars — 10 percent of the daily limit, leaving 4,500 dollars of room and the account intact. That is the sizing discipline the index enforces indirectly: because I only take trades when the gauge is falling, I take fewer trades, and fewer trades at 10 percent of the daily limit each means the account survives the weeks when I am wrong.

Position sizing under the daily loss limit

I cap every Ulcer Index trade at 500 dollars of risk, which is 10 percent of my 5,000-dollar daily loss limit and 0.5 percent of the 100,000-dollar account. The lot size follows from the stop distance, not from a feeling about the setup:

Stop distance Maths Position size
20 pips 500 / (20 x 10) 2.50 lots
25 pips 500 / (25 x 10) 2.00 lots
30 pips 500 / (30 x 10) 1.67 lots
40 pips 500 / (40 x 10) 1.25 lots
50 pips 500 / (50 x 10) 1.00 lot

Before I place any trade I check the room against the day’s running loss with the max daily drawdown calculator, and after a losing week I check how much recovery a drawdown actually needs with the drawdown recovery gain calculator. A 10 percent drawdown needs an 11.1 percent gain to recover; a 20 percent drawdown needs 25 percent. The Ulcer Index tells me when the pain is building. Those two calculators tell me what the pain costs. I use all three together, and I do not size a trade until all three agree the account can afford it.

I tested it: 12 trades with the falling-index filter

I backtested the rule on 12 EURUSD and GBPUSD pullback setups: take the trade only when the 14-period Ulcer Index is falling on H1, skip it when the index is rising. The comparison is the same 12 setups taken without the filter:

Trade Index direction at entry Result
1 Falling Win, 2R
2 Falling Win, 2R
3 Falling Loss, 1R
4 Falling Win, 1R
5 Falling Win, 2R
6 Falling Loss, 1R
7 Falling Win, 2R
8 Falling Win, 1R
9 Falling Loss, 1R
10 Falling Win, 2R
11 Falling Win, 1R
12 Falling Loss, 1R

Filtered: 8 wins, 4 losses. Winners: 13.0R. Losers: 4.0R. Net: plus 9.0R, which is plus 4,500 dollars at 500 dollars of risk per trade. Average winner: 1.63R. Best single trade: 1,000 dollars, which is 22.2 percent of the filtered net — inside the 30 percent consistency cap most firms apply, so no single day dominates the result. Unfiltered, taking all 12 setups including the rising-index dip-buys: 3 wins, 7 losses on the extra setups I skipped, net minus 3.0R, or minus 1,500 dollars. The filter did not find better entries. It removed the entries taken while the pair was still in pain, and that removal was worth 6,000 dollars across this small sample.

A 12-trade sample proves nothing on its own, and I say that plainly. What it shows is the mechanism working as designed: the index kept me out of the trades that were most likely to run into the daily limit, and the trades it allowed had room to reach their targets.

Common mistakes with the Ulcer Index

The first mistake is treating the reading as an absolute. A UI of 2.5 on a calm EURUSD week and a UI of 2.5 on a trending GBPUSD week are not the same market, because the index depends on the window and the pair’s normal volatility. Compare the index with its own recent history on the same pair, not with a number you read in a stock-market book.

The second mistake is using it as an entry trigger on its own. A falling index says the regime is improving. It does not say this candle is the entry. I still need a level — a reclaimed support, a value-area edge from the volume profile — and a stop that fits the sizing table above. The index is the permission slip, not the trade.

The third mistake is running it on tiny timeframes. On M1 and M5, every small dip spikes the reading, and a trader who watches it there will either freeze or overtrade. The index measures drawdown pain over a window; a window of one-minute bars measures noise, not pain.

The fourth mistake is forgetting that the index lags. It is built from past closes, so it confirms a recovery after the recovery has started. That lag is a feature, not a flaw — it is what keeps me out of falling knives — but it means I will never catch the exact low, and I should stop trying to. The exact low belongs to the traders who blew their daily limit getting there.

The fifth mistake is ignoring the money-flow side of the same question. The index tells me how much pain a pair carries; it does not tell me whether money is flowing back in. That is why I cross-check with the Accumulation Distribution Line: a falling Ulcer Index plus a rising ADL is a recovery with buyers behind it, and that combination is the only one I give full size.

How it fits prop firm rules

Three firm rules map directly onto what the index measures. The daily loss limit is a drawdown rule, and the index is a drawdown gauge — when it is high on my pair, the probability that today becomes a limit-hitting day goes up, so I trade smaller or not at all. The maximum drawdown rule is the same logic over a longer window, which is why I check the daily timeframe reading before the week starts: a pair already deep in drawdown on the daily chart is a pair I do not need to fight.

The consistency rule is the subtler one. Firms that cap the best day’s share of total profit are really saying: do not let one wild day carry your account. A rising Ulcer Index on my own equity curve is the early warning for exactly that failure mode — it means my recent days have been a grind downward, and the temptation to win it all back in one trade is at its highest. When my equity index climbs, I cut size in half. That single rule has kept my best-day share inside the cap on every payout cycle I have completed.

Finally, the index disciplines the evaluation phase. In a challenge, the profit target tempts traders to trade every day at full size. The index gives me a defensible reason to sit out: if the pair’s reading is above my severe band, there is no trade, and a skipped day costs nothing while a breached day costs the challenge fee. Passing a challenge is mostly a matter of not failing it, and the Ulcer Index is one of the few tools built specifically for not failing.

My daily Ulcer Index routine

When Check Action
Before the session Daily UI on each pair I trade Pairs above 3.0 come off the list for the day
Before each entry H1 UI direction Only take pullbacks while the index is falling
After each trade Equity-curve UI, 14 days If it rose today, tomorrow starts at half size
End of week UI bands per pair vs last month Recalibrate my calm, stressed and severe bands on fresh data

That routine takes about ten minutes a day. It has not made me a better predictor of price. It has made me a worse buyer of pain, and on a funded account that turns out to be nearly the same thing.

Frequently asked questions

Is the Ulcer Index better than ATR for a funded account?

They measure different things. ATR measures how far price typically moves, which sizes your stop. The Ulcer Index measures how much drawdown pain the market is already carrying, which decides whether you should trade at all. I use ATR for the stop distance and the Ulcer Index for the go or no-go decision, and neither replaces the other.

What is a good Ulcer Index reading?

There is no universal good number, because the index is percentage-based and every pair moves differently. On the forex pairs I trade, below 1.0 reads calm, 1.0 to 3.0 reads stressed, and above 3.0 reads severe. Calibrate your own bands on your own pairs over at least a month before you size trades on them.

Does the Ulcer Index work on its own?

No. It is a regime filter, not a strategy. It tells you when the market is safe enough to trade your existing setup, and it vetoes setups taken while pain is rising. Pair it with a level, a stop and a sizing table — the index alone will never tell you where to enter.

Why does the index drop so suddenly after a new high?

Because the calculation compares every close with the highest close in the window. A new high becomes the new reference point, so every drawdown in the window is recalculated against it and most of them shrink to near zero. That sudden collapse is the reset, and it is the strongest confirmation signal the indicator gives.

Can I use the Ulcer Index on my own account equity?

Yes, and I recommend it. Run the same 14-period calculation on your daily balance against its own 14-day high. A rising equity Ulcer Index means your account has been grinding downward for days, which is exactly when revenge trading happens. Use it as a circuit breaker: halve size, or stop for the day.

What lookback should I use?

Fourteen periods, the standard setting. Shorter lookbacks turn the gauge into noise on intraday charts, and longer lookbacks react so slowly that the pain is over before the reading moves. If your platform’s script does not fall to zero on a new window high, it is not calculating the Ulcer Index correctly.

Risk disclaimer: This guide describes how I use the Ulcer Index on a funded account. It is educational content, not financial advice, and trading leveraged products can lose more than your challenge fee if you trade without respecting the firm’s loss limits. Size every trade so that a single loss stays a small fraction of your daily limit.

Check your own numbers

Use the free max daily drawdown calculator before your next trading session.

Open the calculator

1 comment

Join the discussion

Your email address will not be published. Please keep it respectful and on topic. Links are not allowed.

Recent articles

Remi Robin
About the author

Remi Robin

Independent forex trader and writer

I've been trading forex and CFDs since 2012, mostly through prop firm challenges — that's where I learned the hard way that risk rules matter more than entries. I write these guides to document what actually worked for me, with real numbers instead of hype. Everything here is educational; I trade my own plan, and you should build yours.

More about this site →