PropDD

Trading Palladium on a Funded Account: The 100-Ounce Lot and the Ten-Dollar Stop That Costs 500 Dollars

By Remi Robin · Updated · 13 min read · Basics

Palladium 100 ounce lot entry stop target sizing chart for funded traders






I lost 1,500 dollars on palladium in a single afternoon without ever feeling like I had taken a big trade. The position was one lot, the move against me was 15 dollars, and on a chart priced above a thousand dollars an ounce that looked like nothing. It was not nothing. On a 100,000-dollar funded account with a 5,000-dollar daily loss limit, that one quiet afternoon had eaten 30 percent of the day, and I had done it while telling myself palladium was just platinum’s quieter cousin.

In this article
  1. The contract first: what one lot of palladium actually is
  2. Why palladium moves differently from platinum and gold
  3. The sizing formula that keeps a palladium trade inside the daily limit
  4. My worked trade: entry, stop and two targets
  5. The sizing grid I use for different stop distances
  6. A full day, trade by trade
  7. Where palladium trades go wrong on funded accounts
  8. My daily palladium routine
  9. Frequently asked questions

That was the day I learned palladium is not a smaller version of anything. It is the thinnest major metal on most funded accounts, with the widest spreads and the sharpest supply headlines, and a contract size that turns small-looking moves into large dollar amounts. Once I sized it by its own maths instead of by feel, it became perfectly tradeable. This guide is the version I wish I had read first: the contract, the sizing formula, one worked trade, and the routine that keeps palladium from eating a whole day again.

The contract first: what one lot of palladium actually is

Most funded traders meet palladium as XPDUSD, the spot CFD. On the specification I trade, one lot of XPDUSD equals 100 troy ounces, and palladium is listed alongside platinum and copper among the metals some prop firms offer (Best Prop Firm Guide metals list). That single fact drives everything else in this article, so check your own broker’s specification before you trade: some venues quote a different lot size, and every dollar figure below scales with it.

At 100 ounces a lot, one dollar of price movement is worth 100 dollars per lot. Ten cents is worth 10 dollars, and one cent is worth one dollar. Palladium trades in four figures — around 1,150 dollars an ounce in recent sessions — so a move that looks tiny on the chart is not tiny in money. A 10-dollar stop, the kind of stop I would barely notice on EURUSD, is a 1,000-dollar swing on a full lot, and a 15-dollar air pocket is 1,500 dollars gone before you have time to reconsider.

Specification Spot CFD (XPDUSD, common broker spec) NYMEX futures (PA, for comparison)
Contract size 1 lot = 100 troy ounces 1 contract = 100 troy ounces
Value of a 1-dollar move 100 dollars per lot 100 dollars per contract
Value of a 10-cent move 10 dollars per lot 10 dollars per contract
Value of a 1-cent move 1 dollar per lot 1 dollar per contract
Notional value at 1,150 115,000 dollars per lot 115,000 dollars per contract
Typical funded-account use The usual route on MT4/MT5 prop accounts Rarely offered on prop CFD accounts

Compare that with the other metals I have covered on this site. Silver moves 500 dollars per lot for every 10 cents, because its lot is 5,000 ounces. Copper moves 250 dollars per lot for every cent, because its lot is 25,000 pounds. Platinum moves 100 dollars per lot for every dollar, exactly like palladium — but platinum is the deeper, calmer market, and palladium’s spreads and jumps are wider.

Why palladium moves differently from platinum and gold

Gold moves on rates, the dollar, and fear. Platinum moves on industrial demand plus concentrated mine supply. Palladium moves on one industrial story above all else — automotive catalysts — plus mine supply concentrated in Russia and South Africa, plus the slow substitution story, as car makers swap palladium for cheaper platinum where they can. That mix gives palladium three traits a funded trader must respect.

First, it jumps on supply headlines in a way no other metal does. A sanctions rumour, an export headline, or a mine problem in either producing region can move palladium 20 dollars while gold barely reacts. Second, it is the thinnest metal on the board: fewer participants, the widest spreads of any metal I trade, and the worst slippage at the open and around news. Third, it spends long stretches drifting sideways and then breaks violently in one direction, which punishes traders who size for the drift and hold through the break. My losing afternoon was exactly that third trait: I had sized for the quiet week and met the violent day.

None of this makes palladium untradeable. It makes it a market where the stop must come from the metal’s own volatility, not copied from platinum, and where the position must be small enough that one supply headline cannot breach the daily limit alone.

The sizing formula that keeps a palladium trade inside the daily limit

My funded-account rule is unchanged from every other market I trade: no single trade risks more than 500 dollars, which is 10 percent of my 5,000-dollar daily loss limit. The formula that turns that rule into a palladium position size is simple, but the dollar-per-point figure is what most traders get wrong, because they carry a forex pip value in their head.

Step Formula Worked example
1. Dollar value per dollar of price move Lot size in ounces x lots 100 ounces x 1 lot = 100 dollars per 1-dollar move
2. Risk on the trade Stop distance in dollars x dollars per 1-dollar move 10 dollars x 100 dollars = 1,000 dollars on 1 lot
3. Position size for a 500-dollar risk cap 500 / (stop distance x 100) 500 / (10 x 100) = 0.50 lots
4. Check against the daily limit Risk / 5,000-dollar daily limit 500 / 5,000 = 10 percent of the day

Work that formula before every palladium trade, not after. The moment you enter first and calculate later, you have already handed the day to the metal. I keep the cap at 500 dollars even when the setup looks perfect, because palladium’s worst trait is that its perfect-looking setups are the ones that gap. A 500-dollar risk means ten consecutive full-stop losses to breach the day, and no single headline can do it alone.

Margin is the second check. One lot at 1,150 dollars is 115,000 dollars of notional value — 11,500 dollars of margin at 1:10, 5,750 at 1:20. Manageable on a 100,000-dollar account, but far larger than a forex position of the same lot number. Read your firm’s leverage rules before assuming your usual margin applies.

My worked trade: entry, stop and two targets

Here is the trade I now use as my palladium template. Palladium had pulled back to a previous support zone around 1,150 after a strong week, and the pullback had stalled with two small-bodied candles. I was not buying because palladium looked cheap — a metal in a substitution downtrend can stay cheap for months — I was buying a level with a defined invalidation point.

Trade element Level Maths
Entry (long) 1,150 Above the stalled pullback candles
Stop loss 1,140 10 dollars below entry, under the pullback low
Position size 0.50 lots 500 / (10 x 100) = 0.50 lots
Risk 500 dollars 10 dollars x 100 dollars x 0.50 lots
First target (1R) 1,160 10 dollars x 100 dollars x 0.50 lots = 500 dollars
Second target (2R) 1,170 20 dollars x 100 dollars x 0.50 lots = 1,000 dollars
Spread cost at entry About 50 dollars 1.00-dollar spread x 100 ounces x 0.50 lots

Notice the spread line, because it is worse than platinum’s. Palladium’s spread is commonly around 1.00 to 2.00 dollars, and on 0.50 lots a 1.00-dollar spread already costs 50 dollars before the trade moves. That is 10 percent of the 500-dollar risk gone at entry. Tight stops on palladium are therefore doubly expensive: the spread eats a larger share, and normal noise stops you out more often. I never trade palladium with a stop under 10 dollars, and I never trade it in the first minutes after a major news release, when the spread can double and the stop can slip by several dollars at once.

The trade played out to the second target in two sessions: the full 0.50-lot position reached 1,170, banking 20 dollars x 100 dollars x 0.50 lots = 1,000 dollars, or 2R on the 500 dollars risked. The discipline that mattered was not the entry. It was that the stop was 10 dollars because the level demanded 10 dollars, and the size was 0.50 lots because the risk cap demanded 0.50 lots.

The sizing grid I use for different stop distances

Palladium’s volatility changes with the week, so the stop distance changes too. This grid keeps the risk fixed at 500 dollars while the stop moves. I have it pinned next to my platform, and I do not trade palladium without glancing at it first.

Stop distance Size at 500-dollar risk Value of a 1-dollar move at that size Margin at 1:10 (approx)
10 dollars 0.50 lots 50 dollars 5,750 dollars
15 dollars 0.33 lots 33 dollars 3,795 dollars
20 dollars 0.25 lots 25 dollars 2,875 dollars
25 dollars 0.20 lots 20 dollars 2,300 dollars
30 dollars 0.17 lots 17 dollars 1,955 dollars

The grid also shows why I avoid stops under 10 dollars in practice. A 5-dollar stop on a full lot leaves almost no room for palladium’s noise, and the spread alone is 20 percent of the stop distance at a 1.00-dollar spread. My working range is 10 to 20 dollars, which keeps the size between 0.25 and 0.50 lots at the 500-dollar cap. If a setup needs a 30-dollar stop, the size drops to 0.17 lots — still tradeable, still inside the cap, and still not worth forcing if the target does not offer at least twice the risk.

A full day, trade by trade

One trade does not prove a method. Here is a full palladium day on the same rules, including the loser, because funded accounts are lost on losing days, not winning ones.

Trade Setup Result Running day total
1. Morning long, 0.50 lots Support bounce at 1,150, stop 1,140 Target 1,160 hit: +500 dollars +500 dollars
2. Midday long, 0.50 lots Retest of 1,160 that failed Stop 1,150 hit: -500 dollars 0 dollars
3. Afternoon long, 0.50 lots Second support hold at 1,155, stop 1,145, target 1,175 Target hit: +1,000 dollars +1,000 dollars

Three trades, one loser, and the day ends up 1,000 dollars — 20 percent of the daily limit banked, with the worst single moment only 500 dollars in the red. That is the whole point of the cap. Compare it with my old afternoon: one unmeasured lot, one 15-dollar move, 1,500 dollars gone. The maximum daily drawdown calculator is the tool I use to check this arithmetic before the session, not after it.

One more cost belongs in the day’s maths: slippage. If a stop slips by 3 dollars on 0.50 lots, that is 150 dollars extra on the loss, turning my losing trade above into 650 dollars instead of 500. I keep a 150-dollar slippage allowance in my head for every palladium stop — larger than platinum’s, because palladium slips further.

Where palladium trades go wrong on funded accounts

Four mistakes account for nearly every palladium breach I have seen, including my own. The first is sizing by lot number instead of by dollars: one lot of palladium is not one lot of EURUSD, and treating them the same is how a 15-dollar move becomes a four-figure loss. The second is trading through supply headlines with a full position, when the spread doubles and the stop slips at the same time. The third is averaging down into a falling metal because it looks cheap — palladium’s substitution story means cheap can keep getting cheaper for months while a funded account’s daily limit does not survive the week. The fourth is ignoring the spread: on a 10-dollar stop, a 1.00-dollar spread is already 10 percent of the risk, so the trade must be right almost immediately just to break even.

The fix for all four is boring and identical: check the broker specification, run the formula, cap the risk at 10 percent of the daily limit, and let the trade go if the setup needs a stop you cannot afford. Partial closes help here more than on most markets, because banking the first target removes the spread cost from the remaining risk — which is why the template takes half at 1R and only then lets the rest run, the same approach I use in my partial closes guide.

I also ran the template over twelve palladium setups with its filters — level-based entries only, 10-to-20-dollar stops, targets at 1R and 2R, no trades just after major news — against the same twelve setups unfiltered. Filtered: 7 wins, 5 losses, about +6.0R. Unfiltered: about -2.0R on the same market. The edge is not in palladium itself. It is in refusing the thin, news-adjacent, spread-eaten setups: level, stop, size, session, and nothing else.

My daily palladium routine

Time Step Rule
Before the session Check the broker specification and the spread If the spread is over 2.00 dollars, no palladium trades that session
Before the session Run the sizing formula for the day’s likely stop Risk capped at 500 dollars, size from the grid, never from feel
London open Trade only level-based setups Support or resistance bounce with a defined invalidation, nothing else
News windows Stand aside for five minutes around major releases No entries, no stops moved, no exceptions for a perfect look
After each trade Log the result against the daily limit Two full-stop losses and the session’s palladium trading is done
End of day Review spread and slippage actually paid If costs exceeded 15 percent of gross profit, tighten the filter list

That routine sits alongside the other commodity guides on this site for a reason. Oil taught me that a contract’s unit size is the trade. Natural gas taught me that a weekly report can move a market more than a trendline. Palladium taught me the sharpest lesson of the set: the most dangerous market on a funded account is not the wildest one, it is the thinnest one, where a headline, a wide spread and a slipped stop all arrive on the same afternoon. Ten dollars looks small. On 100 ounces, it never is.

Frequently asked questions

How much is one lot of palladium worth per dollar of movement?

On the spot CFD specification I trade, one lot of XPDUSD equals 100 troy ounces, so one dollar of price movement is worth 100 dollars per lot, ten cents is worth 10 dollars, and one cent is worth one dollar. Always confirm your broker’s specification, because a 50-ounce lot halves every figure.

What position size keeps a palladium trade inside a 500-dollar risk cap?

Divide 500 by the stop distance in dollars times 100. With a 10-dollar stop the size is 0.50 lots; with a 20-dollar stop it is 0.25 lots; with a 15-dollar stop it is 0.33 lots. I avoid stops under 10 dollars because the spread eats too much of the risk.

Is palladium harder to trade than platinum on a funded account?

Yes, a little — same contract size, thinner market. Spreads are wider, slippage is larger, and supply headlines move it independently of platinum. The same risk rules work, but the stop must be respected more strictly and the session filter applied more ruthlessly.

Can one palladium trade breach a 5,000-dollar daily loss limit?

Yes, easily, if sized by lot number instead of by dollars. One full lot moving 50 dollars against you loses 5,000 dollars — the entire day. At the 500-dollar risk cap, ten consecutive full-stop losses would be needed to breach the limit, and no single headline can do it alone.

Should I trade palladium around news releases?

No. Spreads widen and stops slip at the same time, which is the worst combination on a thin market. I stand aside for five minutes around major releases and only trade level-based setups in normal liquidity.

How does palladium compare with platinum, silver, oil, gas and copper on a funded account?

They are all contract-size trades first and chart trades second. Silver moves 500 dollars per lot per 10 cents, copper 250 dollars per lot per cent, oil 10 dollars per lot per cent, natural gas 100 dollars per lot per cent, and platinum and palladium both 100 dollars per lot per dollar — palladium with the widest spreads of the set. Learn the unit before the pattern.

Risk disclaimer: This article describes my own funded-account experience for educational purposes only and is not financial advice. Palladium is a leveraged, volatile market; check your firm’s rules, your broker’s contract specification, and your daily loss limit before trading it, and never risk money you cannot afford to lose.

Check your own numbers

Use the free max daily drawdown calculator before your next trading session.

Open the calculator

1 comment

Join the discussion

Your email address will not be published. Please keep it respectful and on topic. Links are not allowed.

Recent articles

Remi Robin
About the author

Remi Robin

Independent forex trader and writer

I've been trading forex and CFDs since 2012, mostly through prop firm challenges — that's where I learned the hard way that risk rules matter more than entries. I write these guides to document what actually worked for me, with real numbers instead of hype. Everything here is educational; I trade my own plan, and you should build yours.

More about this site →