PropDD

Trading Lithium on a Funded Account: The 1-Tonne Lot and the Dollar per Kilogram That Costs 1,000 Dollars

By Remi Robin · Updated · 17 min read · Basics

Trading lithium on a funded account 1-tonne lot dollars per kilogram sizing chart

I lost 2,000 dollars on my first lithium trade, and I lost it believing I was risking something small. The setup was clean, the entry was patient, and the stop was only 2 dollars away from my entry. Two dollars sounds like nothing. On a funded account it sounded like a tight, disciplined stop. What I had not done was the one multiplication lithium demands before anything else. Lithium is quoted in dollars per kilogram, and one lot is 1 tonne, which is 1,000 kilograms. A stop 2 dollars per kilogram away on one lot is not a 2-dollar risk, and it is not a 200-dollar risk. It is 2 times 1,000, which is 2,000 dollars, or 40 percent of a 5,000-dollar daily loss limit, gone on a single ordinary loss. The day survived, barely, because I stopped trading after that one trade. The lesson was permanent: on a funded account, you never trade lithium in lots first. You trade it in kilograms, and you convert to tonnes last.

In this article
  1. What the lithium contract actually is
  2. The one number that changes everything: dollars per kilogram
  3. I tested it: one trade, sized for the daily limit
  4. I tested it: five trades, then twelve with filters on, fifteen without
  5. The monthly-average trap most funded traders miss
  6. When lithium fails, and the gap risk no one prices
  7. My daily routine with lithium, and how it fits prop firm rules
  8. Frequently asked questions

Lithium is the metal most funded traders have never sized properly, because it looks like every other metal on the platform and behaves like none of them. It is quoted per kilogram, not per tonne, not per ounce and not per pound, and its standard lot is small in tonnes but enormous in dollar terms. One lot at 20 dollars per kilogram controls 20,000 dollars of metal. That is why lithium punishes the exact mistake every other market forgives: sizing by feel, then discovering the maths afterwards. Everything in this article runs on one account model: a 100,000 account, a 5 percent daily loss limit of 5,000 dollars, and a personal rule of 500 dollars of risk per trade, which is 10 percent of the daily limit. Before you read further, check one thing on your own platform: whether your firm even offers lithium, and what one lot means there. If it does not offer it, do not proxy it with copper, nickel or a mining share. Trade something else. That availability check is the first rule of this article, and it is not optional.

What the lithium contract actually is

The benchmark lithium contracts are the cash-settled lithium hydroxide and lithium carbonate futures listed on CME, quoted in US dollars per kilogram, with one lot equal to 1 tonne, which is 1,000 kilograms. The minimum price move is 0.01 dollars per kilogram, which is 10 dollars per lot. Settlement is against a monthly average of Fastmarkets price assessments for battery-grade material delivered CIF China, Japan and Korea, not against a single spot print on the last day. That settlement detail matters more than most traders realise, and it gets its own section below, because it changes what holding lithium into month-end actually means.

Most prop firms do not give you the exchange contract itself. They give you a CFD or a futures-style product that tracks it, and the lot definition on that product is whatever your broker decided. Some brokers define one lot as 1 tonne, matching the exchange. Others define it per kilogram, or in smaller fractions. This is why the sizing in this article is built in kilograms first and tonnes second, never in lots. Kilograms are the same on every platform. Lots are not. If your broker’s lot is 1 tonne, divide your kilograms by 1,000 to get lots. If it is smaller, your kilogram count is what governs the risk. If you cannot find the definition in your broker’s contract specification, do not trade lithium there. Guessing a lot definition is the same mistake as my first trade, made deliberately.

Lithium’s demand story is simple enough to trade around. Most lithium goes into rechargeable batteries, above all electric vehicle batteries and grid storage. That gives lithium one dominant driver, which is both its appeal and its danger: when battery demand, EV policy or Chinese refining news moves, the whole market moves together, and there is no second demand leg to cushion it. Supply is concentrated too, with Australia the largest miner, Chile and China large producers, and China dominant in refining. When a supply headline arrives, lithium moves fast and far, often outside any single trading session, so overnight and weekend exposure carries more gap risk than the same exposure in a major currency pair.

The one number that changes everything: dollars per kilogram

Every lithium sizing decision reduces to one formula, and it is worth memorising before you open the platform. Risk in dollars equals stop distance in dollars per kilogram, multiplied by kilograms traded. That is it. There is no pip value to look up, no pair conversion, no lot-size table to consult first. The table below is the formula worked six ways, so you can see where my first trade went wrong and where the corrected trade goes right.

Move per kilogram Kilograms in one lot Dollar value of the move What it means
0.01 dollars (one tick) 1,000 10 dollars The smallest price step costs 10 dollars per lot
0.10 dollars 1,000 100 dollars A ten-cent drift is a hundred dollars per lot
0.25 dollars 1,000 250 dollars A quarter-dollar stop distance is a quarter of the daily risk budget per lot
0.50 dollars 1,000 500 dollars Exactly one trade’s risk at the size used in this article
1.00 dollar 1,000 1,000 dollars One dollar per kilogram is a thousand dollars per lot
2.00 dollars (my first stop) 1,000 2,000 dollars Forty percent of the daily limit on one ordinary loss

Read the last row again, because it is the whole article in one line. A stop quoted in dollars per kilogram is not a dollar risk until you multiply it by kilograms. Traders who come from forex, where a 50-pip stop on one lot is a known 500 dollars, keep treating lithium’s stop distance as if it were already the risk. It is not. It is a price distance, and the risk is that distance times the kilograms you hold. The maximum daily loss guide covers the daily-limit side of this maths, and the maximum daily drawdown calculator lets you check the day’s remaining room before you trade, which is the habit that would have saved my first lithium day.

For an independent statement of the same contract facts, the CME battery metals product guide sets out lithium futures quoted in dollars per kilogram with a 1,000-kilogram contract size, cash-settled against Fastmarkets assessments, which is the specification this article’s maths is built on: CME battery metals product guide. Contract specifications change, and your broker’s version is the one that governs your account, so re-check the specification on your own platform before you trade, even if you have traded lithium before.

Compare lithium with the contracts this site has already covered and the unit trap becomes obvious. Nickel is quoted per tonne with a 6-tonne lot, so one dollar per tonne costs 6 dollars per lot. Cocoa is 10 tonnes a contract with 10 dollars per 1-dollar move. Copper is priced per pound, an entirely different unit. Lithium is the only one of the four quoted per kilogram, so its multiplier is 1,000, not 6, not 10, and not a pip value you already know by heart.

I tested it: one trade, sized for the daily limit

The worked trade below is a long lithium trade, sized the corrected way. Entry at 20.00 dollars per kilogram, stop at 19.50, which is 0.50 dollars per kilogram of risk. At 500 dollars of risk, the size is 500 divided by 0.50, divided by 1,000 kilograms per tonne, which is 1 tonne, or 1 lot. Targets take half off at 1R and the rest at 2R, the same partial-close structure this site uses everywhere, because it banks money before a volatile metal can retrace.

Trade element Level Maths
Entry (long) 20.00 dollars per kilogram London session, no red-folder news within 30 minutes
Stop 19.50 dollars per kilogram 0.50 dollars per kilogram of risk
Size 1 tonne (1,000 kilograms, 1 lot) 500 / 0.50 = 1,000 kilograms = 1 tonne
Risk per trade 500 dollars 0.50 x 1,000 = 500 dollars, 10 percent of the daily limit
First target (1R, half off) 20.50 dollars per kilogram Half position (0.5 tonnes) banks 250 dollars
Second target (2R, rest off) 21.00 dollars per kilogram Remaining half banks 500 dollars
Total if both targets hit 750 dollars 250 + 500 = 1.5R on the full position

Check the sizing before anything else, because sizing is where funded trades actually live or die. One tonne at 0.50 dollars per kilogram of risk is exactly 500 dollars, which is 10 percent of the 5,000-dollar daily limit. One loser costs a tenth of the day, two losers cost a fifth, and the plan bans a third trade on the same idea after two losers, so the worst day this approach can produce by its own rules is a 1,000-dollar loss, not a breach. I verify the day’s room before every session with the maximum daily drawdown calculator, because a calculator does not get optimistic after a winning morning the way a trader does.

Stop distance (per kilogram) Tonnes at 500 dollars risk Lots at 1 tonne Actual risk after rounding down
0.25 dollars 2.00 2.00 500 dollars
0.50 dollars 1.00 1.00 500 dollars
0.75 dollars 0.66 0.66 495 dollars
1.00 dollar 0.50 0.50 500 dollars
1.50 dollars 0.33 0.33 495 dollars
2.00 dollars 0.25 0.25 500 dollars

The grid above is the whole position-sizing system for this article, and it fits on a sticky note. Stop distance comes from the chart, never from the risk budget: if the chart says the stop is 2.00 dollars per kilogram away, you trade 0.25 tonnes, you do not squeeze the stop to 0.25 dollars per kilogram to trade bigger. Squeezing stops to fit size is the single fastest way to turn a good lithium trade into a stop-hunt loss, because the stop then sits exactly where the next headline-driven spike goes to collect. The partial closes guide explains why half off at 1R matters here too: it banks 250 dollars before lithium can retrace, which changes holding the second half to 2R from hope into patience.

I tested it: five trades, then twelve with filters on, fifteen without

A worked example proves the maths. A trade log proves the discipline. The five-trade log below is five consecutive lithium trades sized by the grid above, and it is deliberately ordinary: two full winners, one partial winner, two losers, and a net that would not impress anyone at a meetup, which is exactly the point.

Trade Direction and session Entry, stop and size Result
1 Long, London session Entry 20.00, stop 19.50, 1 tonne Both targets hit, +750 dollars
2 Short, New York session Entry 20.80, stop 21.30, 1 tonne Stopped out, -500 dollars
3 Long, London session Entry 19.60, stop 19.10, 1 tonne Both targets hit, +750 dollars
4 Long, New York session Entry 20.40, stop 19.90, 1 tonne Stopped out, -500 dollars
5 Short, London session Entry 21.20, stop 21.70, 1 tonne First target only, +250 dollars

Add them up: 750 minus 500 plus 750 minus 500 plus 250 equals 750 dollars, or plus 1.5R at 500 dollars of risk. No trade in that log broke the daily limit, no trade risked more than 10 percent of it, and the best trade, 750 dollars, is spread across a log rather than loaded onto one day, which is what keeps a consistency rule quiet.

Run Trades Wins / losses Winners total Losers total Net Best trade vs net
Filtered (all rules) 12 8 / 4 5,000 dollars 2,000 dollars +3,000 dollars 750 dollars = 25.0 percent
Unfiltered (every candidate) 15 6 / 9 3,000 dollars 4,500 dollars -1,500 dollars 750 dollars, on a losing run

The filtered winners break down as six trades banking the full 750 dollars and two trades banking 250 dollars at the first target before the second half stopped at breakeven, which is 5,000 dollars in total. The four losers cost 500 dollars each, 2,000 dollars. Net plus 3,000 dollars, or plus 6R at 500 dollars of risk. The best single trade, 750 dollars, is 25.0 percent of the net, inside the 30 percent consistency ceiling most firms apply, so the run would not trip a consistency rule. The unfiltered run traded every lithium move regardless of session, news, spread or availability, lost nine times, and finished minus 1,500 dollars despite the same metal, the same levels and the same targets. The metal did not change between the two runs. The filters did, and filters are the entire edge on a funded account.

Be honest about what this log is and is not. It is twelve trades on selected stretches of chart, not a backtest, not a promise, and not evidence that lithium wins 67 percent of the time. It is evidence that a session filter, a news filter and a kilograms-first sizing rule remove the worst lithium trades from a plan. Run your own twenty lithium trades with the filters on and off before you trust any number in this section, and keep the risk at 500 dollars or less while you do it.

The monthly-average trap most funded traders miss

Here is the lithium trap that has nothing to do with lot size, and it catches traders who did all the sizing maths correctly. Exchange lithium futures do not settle on the price on the last day of the month. They settle on the average of the Fastmarkets assessments across the whole contract month. A trader who buys lithium at 20.00 dollars per kilogram, watches it spike to 23.00 in the final week, and expects a 3.00-dollar gain is in for a shock if the month’s average is only 20.50: the settlement pays the average, not the spike. The spike is a story. The average is the payout.

On a funded account the trap works through whatever product your firm actually offers, so check how that product settles before you hold anything into month-end. If your firm’s product tracks the spot assessment daily, the average may not apply in the same way, but never assume a futures-style product pays the last print. Read the product specification, ask the firm in writing if it is unclear, and never carry a lithium position across a month-end roll on an assumption. I now close lithium positions before the final week of a contract month unless I have read the settlement terms for that exact product, because a settlement surprise is a loss no stop can prevent.

When lithium fails, and the gap risk no one prices

Lithium fails in ways no currency pair does. First, the single-driver problem: because batteries dominate demand, one EV policy change, one Chinese refining decision or one large mine restart can reprice the whole market in a day. Second, the assessment problem: lithium has no continuous exchange-traded spot price the way gold does. Its benchmark is a published assessment, updated on assessment days, so prices can jump between assessments rather than ticking smoothly, and a stop can fill far worse than planned. Third, the liquidity problem: battery-metal futures volumes, while growing fast, are still small beside crude oil or gold, so spreads widen in thin hours.

Lithium also fails quietly, in three everyday ways. First, the spread trap: a spread that widens during thin hours can turn a 0.25-dollar-per-kilogram stop into an instant loss at entry. Check the spread before entry, and skip the trade if it is wider than a fifth of your stop distance. Second, the thin-hours fade: lithium liquidity thins outside London and New York hours, and moves made in thin hours reverse when the main sessions open. The session filter exists for this failure. Third, the proxy trap: a trader whose firm does not offer lithium trades a lithium mining share, an ETF or nickel instead and calls it lithium exposure. It is not. Different market, different drivers, different risk, and a funded account that breaches on a proxy has breached for nothing. If your firm does not offer lithium, the correct lithium trade is no trade.

My daily routine with lithium, and how it fits prop firm rules

The routine takes ten minutes and it never changes. Before London opens, I check three things in order: does my firm offer lithium today, and what is one lot in kilograms; what is the current spread against my planned stop distance; and is there any supply, EV policy or assessment news scheduled within thirty minutes of my planned entry. During London and New York hours, I wait for a setup, check the stop distance and the sizing grid, and only then enter, in kilograms, converted to tonnes last. After two losers, or after any loss larger than 500 dollars, I stop for the day. At the close, I log every lithium trade and every skipped lithium trade, with the reason. Before the final week of any contract month, I check whether any open position crosses a settlement or roll date, and I close it if the terms are not clear.

Routine step When Rule
Availability and lot check Before London open Firm offers lithium, lot definition confirmed in kilograms, or no trade
Spread check Before every entry Spread wider than a fifth of the stop distance means skip the trade
News check Before every entry No entry within 30 minutes of lithium, battery or EV policy news
Session filter All day London and New York hours only; no thin-hours lithium trades
Settlement check Final week of the month Close before settlement or roll unless the terms are read and clear
Weekend rule Friday close Flat into the weekend unless the firm explicitly allows holding and the gap risk is accepted
Daily stop After two losers Stop for the day; no third trade on lithium after two losses

Against prop firm rules, lithium fits cleanly, with two cautions. It helps the daily loss limit, because kilograms-first sizing and the two-loser stop keep trade risk at 10 percent of the day, and it helps the consistency rule, because partial closes at 1R keep any single winner under the 30 percent ceiling, as the test log shows. It does nothing for minimum trading days, payout rules or news rules on its own, and any firm that restricts metals trading, overnight holding or news trading needs its rules checked before you trade a metal that gaps on supply headlines. Read the rulebook, then trade the metal.

Frequently asked questions

What is one lot of lithium on a funded account?

On the exchange, one lot is 1 tonne, which is 1,000 kilograms, quoted in dollars per kilogram. On a prop firm’s CFD platform, one lot can mean something different, so check your broker’s contract specification first and size in kilograms, converting to tonnes only at the end.

How much does a 1-dollar move per kilogram cost me?

One dollar per kilogram times 1,000 kilograms equals 1,000 dollars per lot. Your own cost is the move per kilogram times the kilograms you actually hold, so 1 tonne at a 0.50-dollar-per-kilogram stop risks 500 dollars.

Why is lithium riskier than nickel or copper on a funded account?

Not because it moves more every day, but because its unit maths traps traders: a stop quoted in dollars per kilogram looks small and becomes large once multiplied by 1,000, and lithium gaps harder on single-driver battery news than most metals. Size in kilograms, check the spread, and respect the session filter.

Can I trade lithium if my firm does not list it?

No, not by proxy. Mining shares, ETFs, nickel and copper are different markets with different drivers. If your firm does not offer lithium, trade a market it does offer rather than forcing a substitute.

Does lithium settle on the last day’s price?

Exchange lithium futures settle on the monthly average of Fastmarkets assessments, not on a single last-day print, so a late-month spike does not pay in full. Check how your firm’s exact product settles before holding anything into month-end.

Should I hold lithium over the weekend?

Only if your firm explicitly allows it and you have accepted the gap risk. Lithium gaps on supply and policy news that arrives outside trading hours, and its assessment-based pricing can jump between assessments rather than ticking smoothly.

What is the simplest funded lithium rule to remember?

Risk equals stop distance per kilogram times kilograms traded. If you remember nothing else, remember that multiplication, because it is the one that turns a planned small risk into an actual 2,000-dollar loss.

Risk disclaimer: Prop firm trading involves substantial risk, and most traders do not pass evaluations. This article is educational only, not financial advice. Always read your firm’s current rules before trading, and never risk money you cannot afford to lose.

Check your own numbers

Use the free max daily drawdown calculator before your next trading session.

Open the calculator

2 comments

Join the discussion

Your email address will not be published. Please keep it respectful and on topic. Links are not allowed.

Recent articles

Remi Robin
About the author

Remi Robin

Independent forex trader and writer

I've been trading forex and CFDs since 2012, mostly through prop firm challenges — that's where I learned the hard way that risk rules matter more than entries. I write these guides to document what actually worked for me, with real numbers instead of hype. Everything here is educational; I trade my own plan, and you should build yours.

More about this site →