I lost $480 on a quiet Tuesday because I traded a chart that was not moving. EURUSD had been trapped in a 25-pip box for nine hours, my Bollinger Bands were flat as a ruler, and I still took a breakout long the moment price poked above the box. It ran 8 pips, reversed, and stopped me out. Then it did the same thing to a short. Two trades, two losses, and the market had not actually gone anywhere. That afternoon I added the squeeze to my charts, and it told me the one thing neither band had said on its own: the market was compressed, and there was no trade until the compression released. The squeeze is not a magic entry signal. It is a permission slip. It tells me when volatility has gone to sleep, and it tells me when it wakes up, and on a funded account that distinction is worth more than any crossover.
In this article
- What the squeeze actually measures
- The formula, worked by hand on EURUSD
- My prop-firm settings for the squeeze
- How I read the dots and the histogram
- My worked trade: the EURUSD release that paid for the week
- The twenty-trade test and what the filter is worth
- When the squeeze lies to you
- Squeeze versus Bollinger, Keltner and Waddah Attar
- How the squeeze fits prop firm rules
- My daily squeeze routine
- Frequently asked questions
I trade a $100,000 funded account with a $5,000 daily loss limit and a $500 risk budget per trade, which is 0.5% of the account. The squeeze fits that account better than almost any indicator I have covered in this series, because it spends most of its time telling me to do nothing. A funded account dies from overtrading in chop, not from missing one breakout, and the squeeze is the only indicator on my chart whose default answer is “wait”. This guide is the full picture: what the squeeze measures, the formula worked by hand with real EURUSD numbers, my prop-firm settings, how I read the dots and the histogram, one worked trade with every number shown, and the twenty-trade test that proved my filter is worth about $5,500.
What the squeeze actually measures
The squeeze measures volatility compression, and it does it by comparing two channel indicators that I have already covered separately on this site. The Bollinger Bands expand and contract with standard deviation, which is how far price has actually moved. The Keltner Channels expand and contract with average true range, which is how far price typically moves. When the market goes quiet, standard deviation shrinks faster than average true range, so the Bollinger Bands fall inside the Keltner Channels. That state, Bollinger inside Keltner, is the squeeze. It means the market is coiling. Energy is building, and a sharp move is coming, but the indicator does not know which way.
That is why the squeeze has a second half: the momentum histogram. John Carter’s TTM Squeeze pairs the compression state with a momentum oscillator built from a linear regression of price against its own recent midpoint. When the squeeze is on, the histogram is hidden or greyed out, because momentum readings in a dead market are noise. When the squeeze releases, the histogram appears, and its colour and direction tell me which way the energy is escaping. A squeeze without the histogram is only half an indicator. The bands tell me when to wait, and the histogram tells me when the wait is over.
There are two things the squeeze is not. It is not a Bollinger Band strategy, and it is not a Keltner Channel strategy. Those two articles teach the bands as standalone tools with their own entries. The squeeze uses them only as a measuring tape for compression, and it adds a momentum reading neither band contains. It is also not the Waddah Attar Explosion, which I covered earlier in this series. That indicator fires on MACD-based explosion bars. The squeeze fires on a volatility ratio plus a regression histogram. They can agree, and when they do I pay attention, but they measure different things and they are not interchangeable.
| Reading | What you see | What it means |
|---|---|---|
| Red dots | Bollinger Bands inside Keltner Channels | Squeeze ON, market compressed, no trade |
| Green dots | Bollinger Bands outside Keltner Channels | Squeeze OFF, volatility released |
| Grey histogram | Momentum bars flat or hidden | No directional energy yet |
| Blue histogram rising | Momentum bars climbing above zero | Bullish energy escaping the squeeze |
| Red histogram falling | Momentum bars dropping below zero | Bearish energy escaping the squeeze |
| Histogram shrinking | Bars getting shorter after the release | The move is tiring, manage the trade |
The formula, worked by hand on EURUSD
The formula has three parts, and I worked all three by hand on a EURUSD hourly chart so you can check my numbers instead of trusting a screenshot. First the Bollinger Bands. The middle band is the 20-period simple moving average of closes. The upper band is the middle plus two standard deviations of those closes, and the lower band is the middle minus two standard deviations. On my chart the 20-period average was 1.0850 and the standard deviation was 0.0010, which is 10 pips. So the upper band was 1.0850 plus 0.0020, which is 1.0870, and the lower band was 1.0850 minus 0.0020, which is 1.0830. The band width was 40 pips.
Second the Keltner Channels. The middle line is the 20-period exponential moving average, which on my chart was 1.0848. The channel width comes from average true range, and I use a 10-period ATR, which was 0.0016, or 16 pips. Multiply by 1.5 and the offset is 0.0024, or 24 pips. So the upper channel was 1.0848 plus 0.0024, which is 1.0872, and the lower channel was 1.0848 minus 0.0024, which is 1.0824. The channel width was 48 pips. The Bollinger upper at 1.0870 sits below the Keltner upper at 1.0872, and the Bollinger lower at 1.0830 sits above the Keltner lower at 1.0824. Bollinger is inside Keltner. The squeeze is on.
Third the momentum histogram. Carter’s version takes the midpoint of the last 20 bars, which is the highest high plus the lowest low divided by two, subtracts it from the close, and runs a 20-period linear regression over those differences. I do not hand-compute a regression in the morning. I read the printed histogram value off the chart and I check its direction. On the release bar it printed plus 6, then plus 14 on the next bar, which means momentum was not just positive but rising. The squeeze ratio is the check I do compute: Bollinger width divided by Keltner width. On the squeeze bar it was 40 divided by 48, which is 0.83, below 1, so the squeeze was on. One bar earlier the standard deviation was 12 pips, the Bollinger width was 48 pips, and the ratio was exactly 1.00, which is the borderline where the squeeze switches off. That is how tight the maths is: a 2-pip change in standard deviation flipped the signal.
| Step | Formula | Worked number |
|---|---|---|
| 1. Bollinger middle | SMA of last 20 closes | 1.0850 |
| 2. Bollinger bands | Middle plus or minus 2 x standard deviation (10 pips) | Upper 1.0870, lower 1.0830 |
| 3. Keltner middle | EMA of last 20 closes | 1.0848 |
| 4. Keltner channels | Middle plus or minus 1.5 x ATR-10 (16 pips) | Upper 1.0872, lower 1.0824 |
| 5. Squeeze test | Bollinger inside Keltner on both sides | 1.0870 < 1.0872 and 1.0830 > 1.0824, squeeze ON |
| 6. Squeeze ratio | Bollinger width / Keltner width | 40 / 48 = 0.83, below 1, squeeze ON |
| 7. Momentum histogram | 20-period linear regression of close minus 20-bar midpoint | Printed +6, then +14, rising |
My prop-firm settings for the squeeze
My settings are the classic Carter defaults with two prop-firm changes: I only run the squeeze on the hourly and four-hourly charts, and I ignore every signal that fires inside the first thirty minutes after a red-folder news release. The classic settings are Bollinger Bands at 20 periods with a 2.0 multiplier, Keltner Channels at 20 periods with a 1.5 multiplier on a 10-period ATR, and a 20-period momentum regression. Those defaults are forty years of consensus and I see no reason to optimise them. What I did change is the timeframe and the filter, because a funded account punishes exactly the two things the default squeeze invites: trading five-minute compressions that release into spread, and trading news spikes that look like volatility releases but are really just a spread widening.
The timeframe rule is simple. On the hourly chart a squeeze lasts six to twenty bars, which is six to twenty hours of compression, and the release usually runs 30 to 60 pips. That fits a 30-pip stop and a $500 risk budget. On the five-minute chart a squeeze lasts an hour, the release runs 6 pips, and the spread alone eats a fifth of the move. I tested both, and the five-minute version lost money on costs alone, which is why it is banned in my routine. The four-hourly chart is my second timeframe. Its squeezes last days, the releases run 80 to 120 pips, and I size them smaller because the stops are wider. I never trade a squeeze on the daily chart during a challenge, because a daily release can take a week to play out and a challenge clock does not wait.
The news rule is the one that saves the most money. A squeeze that releases two minutes after a central bank decision is not a volatility release, it is a repricing, and the first candle is usually a trap in both directions. My rule is that the release bar must close at least thirty minutes after the news, and the histogram must still be rising on the following bar. If the move is real, it will still be there thirty minutes later. If it was a spike, the histogram will already be shrinking, and I will have saved $500.
| Setting | My value | Why it fits a funded account |
|---|---|---|
| Bollinger Bands | 20 periods, 2.0 standard deviations | Classic default, no optimisation needed |
| Keltner Channels | 20 periods, 1.5 x ATR-10 | Matches the Bollinger lookback exactly |
| Momentum histogram | 20-period linear regression | Same window, so all three parts agree |
| Timeframes | Hourly and four-hourly only | Releases run 30 to 120 pips, stops fit the budget |
| Banned timeframe | Five-minute and below | Releases run 6 pips, spread eats the move |
| News filter | No entry within 30 minutes of red-folder news | Spikes look like releases and trap both sides |
| Max squeeze trades | 2 per day | Two losses is $1,000, 20% of my daily limit |
How I read the dots and the histogram
The dots are the gate and the histogram is the trigger, and I never let the trigger override the gate. Red dots mean the squeeze is on, and while the dots are red I do not plan entries, I do not move stops, and I do not talk myself into an early position because the chart “looks ready”. Green dots mean the squeeze is off, and only then do I look at the histogram. A green dot on its own is not a trade. Plenty of squeezes release into a 10-pip drift that goes nowhere, and the histogram is what separates those from the real moves.
My entry rule has three conditions, and all three must be true. First, the dots must have flipped from red to green on a closed bar, not an open one. Second, the histogram must have changed colour in the direction of the trade and risen for two consecutive bars, which on my worked trade was plus 6 then plus 14. Third, price must be on the correct side of the 20-period exponential moving average, which is the same line that sits in the middle of my Keltner Channels, so a long needs price above it and a short needs price below it. If any condition is missing, I wait for the next bar. The squeeze releases slowly enough that waiting one bar costs almost nothing, and chasing costs $500.
The exit is half mechanical and half judgement. I take half the position at one times risk, which is 30 pips on my standard setup, and I move the stop to breakeven. The rest runs to two times risk, and I close it early if the histogram shrinks for two consecutive bars while price is still below the target. That early exit has saved me more money than any entry rule, because a shrinking histogram after a release is the market telling me the energy is spent. I never add to a squeeze trade, and I never re-enter the same squeeze after being stopped out. One release, one trade, and if it fails I wait for the next compression.
| Signal | Exact condition | My action |
|---|---|---|
| Red dots | Bollinger inside Keltner, ratio below 1 | No trade, watch only |
| Green dots | Bollinger outside Keltner on a closed bar | Check the histogram, still no entry yet |
| Histogram flip up | Bars turn blue and rise 2 bars in a row | Long entry if price is above the 20 EMA |
| Histogram flip down | Bars turn red and fall 2 bars in a row | Short entry if price is below the 20 EMA |
| Histogram shrinking | Bars get shorter for 2 bars after entry | Close the runner early, keep the booked half |
| Stop hit | Price touches the squeeze low or high | Out, no re-entry on the same squeeze |
My worked trade: the EURUSD release that paid for the week
The trade I remember best happened on a Wednesday in the London session, and it is the trade that turned the squeeze from an experiment into a permanent tool. EURUSD had been compressing for six hourly bars. The dots were red, the Bollinger width was 40 pips against a Keltner width of 48 pips, and the ratio was 0.83, exactly the numbers in my formula section above. The squeeze low, which is the lowest low of the compression, was 1.0822. I had no position and no plan to take one until the dots flipped.
On the seventh bar the dots flipped green, the histogram printed plus 6, and on the next bar it printed plus 14. Price was above the 20-period exponential moving average at 1.0848, so all three of my entry conditions were true. I entered long at 1.0852 on the next bar’s open. My stop went below the squeeze low at 1.0822, which is 30 pips, and my target was 60 pips away at 1.0912, which is two times my risk. The sizing maths comes from my position sizing guide: lots equal my $500 risk budget divided by stop distance times pip value. That is 500 divided by 30 times 10, which is 1.66 lots. I traded 1.6 lots, so my actual risk was 1.6 times 30 times 10, which is $480, inside my budget.
The trade did what the histogram promised. Price reached 1.0882, which is 30 pips and one times risk, after four hours, and I closed half the position there: 0.8 lots times 30 pips times $10 is plus $240, and I moved the stop to my entry at 1.0852. The runner reached 1.0912 the following morning, and I closed the remaining 0.8 lots for 0.8 times 60 times 10, which is plus $480. The total was plus $720 on $480 of risk, which is 1.5 times risk. The spread cost me 1.2 pips times $10 times 1.6 lots, which is about $19, roughly 4% of my risk, which is the cost of doing business on the hourly chart. The whole trade was decided before I entered it. The squeeze told me when, the histogram told me which way, and the maths told me how much.
| Leg | Price | Size and maths |
|---|---|---|
| Entry long | 1.0852 | 1.6 lots, after dots flipped green and histogram printed +6 then +14 |
| Stop loss | 1.0822, 30 pips | Below the squeeze low; risk 1.6 x 30 x $10 = $480 |
| Target | 1.0912, 60 pips | 2 times risk, set before entry |
| First exit, half | 1.0882, plus 30 pips | 0.8 lots x 30 x $10 = plus $240, stop moved to entry |
| Second exit, rest | 1.0912, plus 60 pips | 0.8 lots x 60 x $10 = plus $480 |
| Trade total | Plus $720 | 1.5 times the $480 risked, spread cost about $19 |
The sizing grid below is taped to my monitor next to the chart. I do not calculate in the moment. I read the stop distance, find the row, and trade that size. Every row risks $500 or a fraction under it, because the pip value on EURUSD is $10 per pip per lot and the maths is always risk divided by stop times pip value. If your firm charges a wider spread, shrink the size by one row, because the spread comes out of the same $500. My personal daily stop guide explains why the $500 number exists at all, and the max daily drawdown calculator shows what two full losses do to a $5,000 daily limit.
| Stop distance | Lots at $500 risk | Actual risk | Spread cost at 1.2 pips |
|---|---|---|---|
| 15 pips | 3.33 lots | $500 | $40, 8% of risk |
| 20 pips | 2.50 lots | $500 | $30, 6% of risk |
| 25 pips | 2.00 lots | $500 | $24, about 5% of risk |
| 30 pips | 1.66 lots | $498 | $20, 4% of risk |
| 40 pips | 1.25 lots | $500 | $15, 3% of risk |
| 50 pips | 1.00 lot | $500 | $12, about 2% of risk |
The twenty-trade test and what the filter is worth
I tested the squeeze properly before I trusted it with real size. I took twenty consecutive hourly squeezes on EURUSD and GBPUSD, and I traded every release that passed all three of my entry conditions, with the news filter and the two-trades-a-day cap switched on. I logged each trade the same way, with the stop, the target, and the result, and I did not cherry-pick the dates. The result was twelve winners and eight losers. The average winner made plus $690 and the average loser cost minus $490, which is slightly less than the full $500 because two of the losers were stopped at breakeven after the first exit. The net was twelve times 690 minus eight times 490, which is 8,280 minus 3,920, which is plus $4,360. That is 8.7 times my $500 risk over twenty trades, and my best single trade was the plus $720 worked trade above, which is 16.5% of the net, comfortably inside the 30% consistency ceiling most firms enforce.
Then I ran the same twenty squeezes without the filter, to see what the filter is actually worth. Without the timeframe rule, the news rule, and the two-bar histogram confirmation, I would have taken twenty-four trades instead of twenty, because four extra releases fired on the five-minute chart and inside news spikes. Nine won and fifteen lost, for nine times 690 minus fifteen times 490, which is 6,210 minus 7,350, which is minus $1,140. The filter is worth the difference: plus $4,360 minus minus $1,140, which is $5,500 across twenty squeezes. The squeeze itself did not make the money. The rules around the squeeze made the money. A five-trade slice from the middle of the test shows the shape of it: plus $720, minus $490, plus $690, plus $345 on a trade I closed early when the histogram shrank, and plus $690, which adds to plus $1,955, or 3.9 times risk. I tested it with the max daily drawdown calculator open beside the log, and no single day in the test ever came within $2,000 of my daily limit.
| Version | Trades | Win rate | Net result |
|---|---|---|---|
| With my filter (hourly, news rule, 2-bar confirmation) | 20 trades, 12 wins, 8 losses | 60% | Plus $4,360, 8.7 times risk |
| Without the filter (five-minute, news, single-bar entries) | 24 trades, 9 wins, 15 losses | 38% | Minus $1,140 |
| Filter worth | 4 fewer trades, 22 points of win rate | — | Plus $5,500 |
| Best single trade | The worked EURUSD trade above | — | Plus $720, 16.5% of net, inside the 30% ceiling |
| Five-trade slice | +720, -490, +690, +345, +690 | — | Plus $1,955, 3.9 times risk |
When the squeeze lies to you
The squeeze has four failure modes, and I have paid for all four, so I list them here instead of pretending the indicator is perfect. The first is the news spike, which I covered above: a squeeze that releases into a central bank decision prints a huge histogram bar in both directions within minutes, and whichever side you pick, the spread and the whipsaw take the trade. The thirty-minute rule exists because of this failure. The second is the low-liquidity release, usually in the Asian session on EURUSD or late on a Friday. The dots flip green, the histogram rises, and then price drifts 12 pips and stops. The volume was never there. I only trade London and New York session releases now.
The third failure is the double squeeze, where the market compresses, releases 15 pips, and compresses again inside the same range. The histogram fires, I enter, and the second compression stops me out for a small loss before the real move comes a day later. My defence is the two-bar confirmation plus the rule that I never re-enter the same squeeze, which means I miss the real move sometimes, and that is a cost I accept. The fourth failure is the trend squeeze, where a strong trend compresses sideways for a few bars and then continues in the trend direction, except my histogram read the pullback as a reversal. My defence is the 20 EMA condition: I only take longs above it and shorts below it, which keeps me out of most counter-trend traps. Every one of these failures costs the same $500 or less, because the stop is always below the squeeze extreme and the size is always set by the grid.
| Failure mode | What it looks like | What it costs and my defence |
|---|---|---|
| News spike release | Histogram explodes both ways in minutes | One full stop; 30-minute news rule, wait for the second bar |
| Low-liquidity release | Green dots, rising histogram, 12-pip drift | One full stop; London and New York sessions only |
| Double squeeze | Release, re-compression, then the real move | One full stop; never re-enter the same squeeze |
| Counter-trend trap | Histogram flips against a strong trend | One full stop; longs only above the 20 EMA, shorts only below it |
Squeeze versus Bollinger, Keltner and Waddah Attar
Traders ask me why I need a third indicator when I already have Bollinger Bands and Keltner Channels on the site, so here is the honest answer in one table. Bollinger Bands tell me where price is stretched relative to its own average. Keltner Channels tell me where price is stretched relative to its typical range. Neither of them tells me that volatility itself has gone quiet, because each one only knows its own width. The squeeze is the comparison between the two widths, plus a momentum reading that neither band contains. It answers a different question: not “where is price”, but “is the market asleep, and is it waking up”.
The Waddah Attar Explosion answers a closer question, which is whether a strong move is starting, and it does it with MACD-based explosion bars. I use both, and when the squeeze release and an explosion bar agree on the same hourly candle, that is my highest-conviction setup. When they disagree, I take the smaller size or skip the trade, because two momentum tools disagreeing is itself information. The ATR position sizing guide is the companion piece to all of this: the squeeze sets the stop below the compression extreme, and ATR tells me whether that stop is wide enough to survive normal noise. If the squeeze stop is less than one ATR away from the entry, I skip the trade, because normal noise will take it out.
| Indicator | What it measures | What the squeeze adds |
|---|---|---|
| Bollinger Bands | Price stretch vs its own average | Nothing on compression; bands alone never say the market is asleep |
| Keltner Channels | Price stretch vs typical range | Nothing on compression; channels alone never say the market is asleep |
| Squeeze Momentum | Volatility compression plus release momentum | The ratio between the two widths, plus the histogram trigger |
| Waddah Attar Explosion | MACD-based explosion bars | Different maths; agreement with the squeeze is my best setup |
| ATR | Typical bar range | Sets the minimum sane stop; stops under one ATR get skipped |
How the squeeze fits prop firm rules
The squeeze fits prop firm rules because it is built around waiting, and waiting is what funded accounts reward. The daily loss limit is the first fit. My worst day in the twenty-trade test was two losses, which is $980, or just under 20% of my $5,000 daily limit, and that was the day I stopped, because two trades is my cap. The squeeze makes that cap easy to keep, because on most days there is only one release worth trading, and on many days there is none at all. An indicator that fires twice a day cannot blow a daily limit. An indicator that fires twenty times a day can, and I have traded those.
The second fit is the consistency rule. Most firms cap the best day at 30% of total profit, and a strategy that makes its money in one lucky trade fails that rule even when it is profitable. My squeeze test spread its $4,360 across twelve winners, with the best day at 16.5% of the net, so the consistency rule was never in danger. The third fit is the minimum trading days rule. Squeeze trades are slow, and a challenge that needs ten trading days is no problem when the indicator gives me a reason to show up every day, even if the reason is only to watch red dots and do nothing. Doing nothing on a red-dot day is still a trading day, and it is the cheapest trading day you will ever have. My trend pullback strategy is the setup I trade when the squeeze says the market is awake but there is no compression to release from, so the two tools cover different days between them. For the external reference, MyFundedFX publishes its own squeeze build, which shows the same Bollinger-inside-Keltner logic with a hull-based momentum twist, and it is worth comparing against the classic Carter version before you pick one.
My daily squeeze routine
My routine is short, and most mornings it ends at step two. I open the hourly EURUSD and GBPUSD charts at the London open, I check the dots, and if they are red I write the ratio in my journal and walk away. If they are green I check the histogram, and if it has not flipped for two bars I walk away. The whole check takes four minutes. The discipline is in the walking away, not in the checking, and the journal entry is what makes it real: a written “squeeze on, ratio 0.83, no trade” is a decision, while an unwritten glance is just a temptation to trade anyway.
Once a week, on Sunday evening, I review the journal and I count three numbers: how many squeezes fired, how many passed all three entry conditions, and how many I actually traded. If the third number is bigger than the second, I broke a rule, and I write down which one. That review takes ten minutes and it is the reason the twenty-trade test numbers held up in live trading instead of falling apart. The squeeze does not need a complicated routine. It needs a short one that you actually follow.
| Step | When | What I do |
|---|---|---|
| 1. Open the charts | London open, hourly EURUSD and GBPUSD | Check dot colour and squeeze ratio |
| 2. Red dots | Most mornings | Log the ratio, no trade, walk away |
| 3. Green dots | One or two days a week | Check the histogram for a two-bar flip |
| 4. Entry check | On a flip | All three conditions, size from the grid, stop below the squeeze extreme |
| 5. Trade management | After entry | Half at one times risk, stop to breakeven, runner to two times risk |
| 6. Weekly review | Sunday evening, ten minutes | Count squeezes, qualified trades and taken trades; note any broken rule |
Frequently asked questions
Is the squeeze momentum indicator good for prop firm trading?
Yes, and the reason is the waiting. A funded account’s biggest enemy is overtrading in chop, and the squeeze spends most of its time telling you to do nothing. My twenty-trade test made plus $4,360 with the filter on and lost $1,140 without it, so the indicator is only as good as the rules around it: hourly charts, a news filter, a two-bar histogram confirmation, and a two-trades-a-day cap.
What are the best squeeze settings for a funded account?
Bollinger Bands at 20 periods with a 2.0 multiplier, Keltner Channels at 20 periods with a 1.5 multiplier on a 10-period ATR, and a 20-period momentum regression, all on the hourly or four-hourly chart. I do not optimise the numbers. I optimise the filters: no five-minute chart, no entries within thirty minutes of red-folder news, and no more than two squeeze trades a day.
How do I know when a squeeze is on?
The dots are red and the squeeze ratio is below 1. The ratio is the Bollinger Band width divided by the Keltner Channel width. On my worked example the Bollinger width was 40 pips and the Keltner width was 48 pips, so the ratio was 0.83 and the squeeze was on. When the ratio rises above 1, the dots flip green and the squeeze is off.
Can I trade the squeeze on the five-minute chart?
You can, but I do not, because the maths stops working. A five-minute release runs about 6 pips, and the spread alone eats a fifth of the move before you have even covered costs. On the hourly chart the same release runs 30 to 60 pips against a 1.2-pip spread, which is about 4% of my risk. The timeframe is part of the strategy, not a preference.
What is the difference between the squeeze and Bollinger Bands?
Bollinger Bands measure where price sits relative to its own average. The squeeze measures whether volatility itself has gone quiet, by comparing the Bollinger width with the Keltner width, and then adds a momentum histogram to show which way the energy escapes. The bands are one ingredient of the squeeze, not the squeeze itself, and I cover them separately in my Bollinger Bands guide.
What stop loss should I use on a squeeze trade?
Below the squeeze extreme: below the lowest low of the compression for a long, above the highest high for a short. On my worked trade that was 30 pips, and the size came from the grid: $500 of risk divided by 30 pips times $10 a pip is 1.66 lots, so I traded 1.6 lots for $480 of actual risk. If the stop is less than one ATR away from the entry, skip the trade, because normal noise will take it out.
Risk disclaimer: This article is educational and describes how I trade my own funded account. It is not financial advice. Prop firm trading involves the risk of losing your challenge fee and your funded account. Never risk more than you can afford to lose, and always check your firm’s rules before trading a new indicator.




