I first learned what volatility expansion costs on a Tuesday when my breakout trade was perfect in every way except one. EURUSD had sat in a tight 25-pip range all morning, then broke out with a strong green candle, and I bought the break exactly as my plan said. The stop was 30 pips, tight, tidy, and completely wrong for what happened next. The market was waking up, the bars were suddenly 45 and 50 pips wide, and my stop was taken out by an ordinary pullback inside a move that then ran 120 pips in my direction without me. The breakout was right. The volatility read was missing. That missing read was Chaikin Volatility, and it has been my range gauge on a funded account ever since.
In this article
- What Chaikin Volatility actually measures
- The formula, worked by hand
- Chaikin Volatility is not Chaikin Money Flow
- Best settings for a funded account
- How to read it: expansion, contraction and the spike
- A worked trade, with every number shown
- The stop-scaling grid: what each volatility reading allows
- I tested it: twelve filtered trades against twelve unfiltered
- Common mistakes with Chaikin Volatility
- My daily routine with Chaikin Volatility
- Frequently asked questions
This guide covers Chaikin Volatility for a funded account. You will learn what it measures, its exact formula worked by hand, the settings I use on a funded account, how to read expansion, contraction and the spike, a worked trade with every number shown, the mistakes that cost funded traders money on it, and how it fits inside a daily loss limit. Everything uses a 100,000-dollar funded account with a 5,000-dollar daily loss limit and a 500-dollar per-trade risk cap.
What Chaikin Volatility actually measures
Most indicators measure price direction or momentum. Chaikin Volatility measures neither. It measures how much the trading range itself is expanding or contracting. For each bar it takes the distance between the high and the low, smooths that distance with an exponential moving average, and then compares today’s smoothed range with the smoothed range from a set number of bars ago. If today’s ranges are wider, the gauge rises. If today’s ranges are narrower, the gauge falls. That is the whole job, and it is a job no directional indicator does.
The distinction matters because a breakout in a quiet market and a breakout in a waking market are two different trades, even when the candles look identical. In a quiet market, ranges are narrow, stops can be tight, and a breakout often fades because nothing is driving it. In a waking market, ranges are widening, stops must be wider, and a breakout has fuel behind it. Chaikin Volatility tells you which market you are in before you size the trade, and on a funded account that ordering, read first, size second, is the difference between a planned trade and a hope. The gauge does not tell you which way price will go. A wide down bar widens the range just as much as a wide up bar, so a rising gauge can precede a sharp fall as easily as a sharp rise. Direction must come from price, trend or another tool. Volatility only tells you how much room price needs.
That is also why the gauge is a filter rather than a trigger. I never buy because Chaikin Volatility is rising. I buy a price setup I already like, and I check whether the gauge agrees that the market is awake enough for the setup, and wide enough that my stop belongs where I put it. Used that way, it stops two funded-account failures at once: trading breakouts in dead markets that fade, and sizing waking-market trades with dead-market stops that get hunted by ordinary noise.
The formula, worked by hand
The formula has three steps, and it uses only highs and lows, never closes and never volume. First, calculate the high-minus-low range for each bar. Second, smooth those ranges with an exponential moving average. Third, compare today’s smoothed range with the smoothed range from a fixed number of bars ago, expressed as a percentage change. The standard settings, and the ones in the ProRealAlgos Chaikin Volatility documentation, are a 10-period EMA and a 10-bar lookback.
| Step | Formula | What it means |
|---|---|---|
| 1. Bar range | Range = High minus Low, each bar | How wide this bar traded, direction ignored |
| 2. Smooth it | Smoothed range = EMA of the range, 10 periods | One noisy bar cannot move the gauge much |
| 3. Compare | Chaikin Volatility = (Smoothed range now minus Smoothed range 10 bars ago) divided by Smoothed range 10 bars ago, times 100 | Percentage change in range width |
Here is the formula on real numbers, using EURUSD on H1. Ten bars ago, the 10-period EMA of the high-low range read 0.0018, which is 18 pips. Today, the same EMA reads 0.0027, which is 27 pips. Subtract the old value from the new one and you get 0.0009. Divide 0.0009 by the old value, 0.0018, and you get 0.50. Multiply by 100 and the Chaikin Volatility reads plus 50 percent. Ranges have widened by half in ten bars. The market is waking up, and any stop sized for the old 18-pip world is now too tight.
The same arithmetic runs the other way. If today’s smoothed range reads 0.0014, or 14 pips, against 0.0020, or 20 pips, ten bars ago, the difference is minus 0.0006, divided by 0.0020 gives minus 0.30, and the gauge reads minus 30 percent. Ranges have contracted by nearly a third. The market is going quiet, breakouts are more likely to fade, and a wide stop is wasted risk. And a spike is easy to spot: a smoothed range of 0.0036 against 0.0018 ten bars ago gives plus 100 percent, a doubling of range width, which is the kind of reading that follows a news shock or a long sleep ending all at once.
Chaikin Volatility is not Chaikin Money Flow
The shared surname causes real confusion, so the difference is worth stating plainly. Both indicators were developed by Marc Chaikin, but they measure entirely different things, and the Chaikin Money Flow guide on this site covers the other one. Money Flow asks whether volume-backed money is flowing in or out, using where each bar closed inside its range and how much volume it traded. Volatility asks only whether the bars are getting wider or narrower, using highs and lows alone, with no volume input at all. One is a money receipt. The other is a range gauge. A market can show strong money inflow while its ranges contract, and it can show wild range expansion on thin volume with no money flow behind it.
| Indicator | What it measures | Inputs | What it cannot tell you |
|---|---|---|---|
| Chaikin Volatility | Whether bar ranges are expanding or contracting | High and low only | Direction, or whether money is behind the move |
| Chaikin Money Flow | Whether volume-backed money is flowing in or out | Close position in range, times volume | How wide the bars are, or how much room a stop needs |
| Average True Range | Absolute volatility in price units | High, low and prior close | Whether volatility is rising or falling relative to itself |
| Bollinger BandWidth | How far apart volatility bands sit | Standard deviation of closes | Range width directly, since it is built on closes |
The practical consequence is that the two Chaikin tools complement each other rather than duplicating each other. I use Money Flow to ask whether a breakout has money behind it, and Volatility to ask whether the market is awake enough for the breakout to run, and how wide my stop must be to survive the bars that follow. A breakout that passes both questions is a different trade from one that passes only one, and on a funded account I only take the trades that pass both. The Bollinger Bands guide is the other neighbour worth knowing: a Bollinger squeeze is the same quiet-market condition seen through closes, while Chaikin Volatility sees it through ranges, and the two agreeing is a stronger quiet signal than either alone.
Best settings for a funded account
Chaikin’s standard settings are a 10-period EMA of the range and a 10-bar comparison, and on a funded account I keep them, because the value of this gauge is in its simplicity. Shortening either number makes the gauge jump on single wide bars. Lengthening either number smooths it into uselessness, since by the time a 20-bar comparison confirms expansion, the expansion is half over. The settings table below is the whole configuration, and the discipline is in the thresholds, not in tuning the parameters.
| Setting | Funded-account value | Why this value |
|---|---|---|
| Range EMA length | 10 periods | Smooths single-bar noise without hiding a genuine wake-up |
| Comparison lookback | 10 bars | Matches the EMA length, so the gauge compares like with like |
| Trading timeframe | H1 | Enough bars for the range average to mean something |
| Trend timeframe | H4, same 10 and 10 settings | The H1 read must agree with the higher timeframe regime |
| Expansion threshold | Plus 25 percent | Breakout trades need this much widening to be worth sizing |
| Contraction threshold | Minus 20 percent | Below this, breakouts fade too often to trade at full size |
| Do not use | Below H1, or either parameter under 10 | Intraday noise makes the gauge flip on single bars |
Do not optimise these numbers to fit recent months. I have seen traders run the lookback at 5, 10 and 20, backtest all three, and pick the winner, which is almost always the setting that happened to fit the last quarter. On a funded account that is a trap, because the setting that fit the last quarter is the setting most likely to fail the next one. Keep 10 and 10, keep it for at least a hundred trades, and judge the thresholds and the stop-scaling rules, not the parameters. If the rules are sound, 10 and 10 work. If the rules are not, no parameter will save them.
How to read it: expansion, contraction and the spike
Chaikin Volatility gives four readings, and they are not equal. Rising through the expansion threshold is the green light for breakout trades. Falling through the contraction threshold is a warning that breakouts will fade. A spike above plus 100 percent after a decline is Chaikin’s classic bottom signal, but it is context, not an entry. And a long, slow decline in the gauge during an advance is his classic maturing-top signal, again context, never a trigger on its own.
| Reading | What you see | What it means | Funded-account action |
|---|---|---|---|
| Expansion | Gauge rising through plus 25 percent | Ranges widening, market waking up | Breakout trades allowed, with scaled stops |
| Contraction | Gauge falling below minus 20 percent | Ranges narrowing, market going quiet | No new breakout trades at full size |
| Spike after a decline | Gauge above plus 100 percent after a long fall | Capitulation-style range explosion | Context only; wait for price to confirm a turn |
| Slow decline in an advance | Gauge drifting down while price climbs | Advance losing energy, ranges shrinking | Do not add to longs; tighten targets, never chase |
| Flat near zero | Gauge hovering around zero for many bars | Ranges stable, no regime change | Trade price setups normally, no volatility adjustment |
The spike rule deserves emphasis, because it runs against beginner instinct. A plus 100 percent reading looks like excitement, and excitement looks like a buy signal. It is not. A volatility spike after a decline says the market panicked, not that it bottomed. Sometimes the panic is the bottom, and sometimes it is the middle of a larger fall with wider bars all the way down. My rule is simple: a spike earns a watchlist entry, not a trade. I wait for price to print a higher low and for the gauge to come back down from its extreme, which together say the panic has passed and a trend can form. The trend pullback strategy on this site pairs well with this rule, because a pullback after a spike is a far safer entry than the spike itself.
A contracting gauge also needs a plain reading. When ranges shrink for days, traders get bored, and bored traders invent breakouts out of range edges that mean nothing. My rule is that a gauge below minus 20 percent removes breakout trades from my list entirely. I can still trade pullbacks inside a trend, where the entry does not depend on expansion, but I do not pay for a breakout that the gauge says has no fuel. That one filter removed more losing trades from my journal than any entry rule I have ever written.
A worked trade, with every number shown
Here is a Chaikin Volatility trade exactly as I took it, with no number hidden. The account is 100,000 dollars, the daily loss limit is 5,000 dollars, and the per-trade risk cap is 500 dollars. The pair is EURUSD on H1. The H4 gauge had risen to plus 30 percent, so the higher timeframe agreed the market was waking. On H1, the gauge read plus 50 percent, using the numbers from the formula section: a smoothed range of 27 pips against 18 pips ten bars earlier. Price had sat in a tight range, then closed above the range high at 1.0950 in the London session. That is the entry this guide trades: a price breakout, confirmed by expansion on both timeframes, sized for a waking market.
| Trade detail | Value | Maths |
|---|---|---|
| Direction | Long EURUSD | Range-high breakout, H1 and H4 gauges expanding |
| Gauge at entry | Plus 50 percent on H1, plus 30 percent on H4 | 27-pip smoothed range vs 18 pips ten bars earlier |
| Entry | 1.0950 | Close of the breakout bar |
| Stop | 1.0900 | 50 pips below entry, under the range low |
| Risk per lot | 500 dollars | 50 pips x 10 dollars per pip per lot |
| Position size | 1.00 lot | 500-dollar cap / 500-dollar risk |
| Actual risk | 500 dollars | 1.00 lot x 50 pips x 10 dollars |
| Target 1 (half off) | 1.1000, plus 250 dollars | 0.50 lots x 50 pips x 10 dollars, 1R banked |
| Target 2 (rest off) | 1.1050, plus 500 dollars | 0.50 lots x 100 pips x 10 dollars, 2R banked |
| Total outcome | Plus 750 dollars, 1.5R | 250 dollars plus 500 dollars, both targets hit |
Two details in that table deserve attention. First, the stop is 50 pips, not the 30 pips I used in the Tuesday trade that opened this guide. The gauge told me the bars were now 27 pips wide on average, so a 30-pip stop sat barely one average bar below the entry, inside ordinary noise. A stop placed inside one average bar is not a stop, it is a donation. Second, the position is split at the targets, and the first target banks exactly one unit of risk. On a funded account, banking 1R early is not timidity. It is the mechanism that keeps a winning trade from becoming a losing day, because once 1R is banked, the worst remaining outcome on the trade is a small net win. For the same reason, the partial closes guide on this site is worth reading alongside this one.
The stop-scaling grid: what each volatility reading allows
This grid is the only sizing reference I use for volatility-filtered trades on EURUSD. It starts from a 40-pip base stop, which is my normal stop for a quiet-market breakout, and scales it by the gauge reading. Every row is the same formula: lots equal to 500 dollars divided by the stop distance in pips times 10 dollars, rounded down to two decimals. The grid assumes a standard lot where one pip is 10 dollars. If your firm quotes a different pip value, redo the grid with your own number before trading.
| Gauge reading | Stop multiplier | Stop distance | Lots allowed | Actual risk taken |
|---|---|---|---|---|
| Contracting, below minus 20 percent | 0.75 | 30 pips | 1.66 | 498 dollars |
| Normal, minus 20 to plus 20 percent | 1.00 | 40 pips | 1.25 | 500 dollars |
| Expanding, plus 20 to plus 50 percent | 1.25 | 50 pips | 1.00 | 500 dollars |
| Strong expansion, above plus 50 percent | 1.50 | 60 pips | 0.83 | 498 dollars |
Notice what the grid does and does not do. It never changes the risk cap. The risk stays at 500 dollars on every row, and only the stop distance and the position size move. Expansion buys room, not risk. A trader who keeps a 30-pip stop in a plus 50 percent market, or who keeps full size with a 60-pip stop, has stopped trading the gauge and started trading a feeling, and the daily loss limit is the thing that pays for that. If you want to check these numbers against your own daily limit, the max daily drawdown calculator on this site runs the same division for any account size.
I tested it: twelve filtered trades against twelve unfiltered
The filter I test here is simple: trade only breakouts where the H1 gauge is above plus 25 percent and the H4 gauge agrees, only in the London or New York session, only with a stop taken from the scaling grid above, and never within an hour of a red-folder news release. The unfiltered set is every range-high breakout over the same period, including breakouts in contracting markets, breakouts with dead-market 30-pip stops in waking markets, and breakouts in thin sessions. Both sets use the same 500-dollar risk cap, so the only difference is the filter. The results are from my own demo journal, not a backtest engine, and the losing trades are included.
| Set | Trades | Winners / losers | Net result |
|---|---|---|---|
| Filtered (expansion + H4 agreement + scaled stop + session) | 12 | 8 / 4 | +4,500 dollars |
| Unfiltered (every range-high breakout) | 12 | 4 / 8 | -1,000 dollars |
Check the filtered maths: five wins at 2R are 5,000 dollars and three wins at 1R are 1,500 dollars, a total of 6,500 dollars, and four losses at 500 dollars are 2,000 dollars, leaving a net of 4,500 dollars. The unfiltered maths: two wins at 1,000 dollars and two wins at 500 dollars are 3,000 dollars, eight losses at 500 dollars are 4,000 dollars, a net loss of 1,000 dollars. The filter did not find dramatically better entries. It removed the worst trades: breakouts in quiet markets that faded, and breakouts in waking markets whose stops sat inside one average bar. That is what most funded-account filters actually do. They keep you out of the conditions where being right about the setup does not matter, because the market is moving on a volatility regime your size did not respect.
Common mistakes with Chaikin Volatility
The first mistake is trading the gauge as a direction signal. A rising gauge says ranges are widening, nothing more. Buying every rise and selling every fall is a coin flip with extra steps, and on a funded account it is a fast way to use up the daily limit. The second mistake is using it below H1. On M5 or M15, a 10-bar range average covers barely an hour, and the gauge flips on single wide bars. The fix is boring: H1 minimum, H4 confirmation, no exceptions for a quiet afternoon. The third mistake is keeping a dead-market stop in a waking market, which is the Tuesday trade that opened this guide. If the gauge says ranges widened by half, the stop must widen too, and the size must shrink to pay for it, or the trade is not allowed.
The fourth mistake is buying the spike. A plus 100 percent reading after a decline is panic, not a bottom, and buying panic because it looks exciting is how funded accounts take their largest single loss of the month. Wait for price to confirm. The fifth mistake is confusing this gauge with Chaikin Money Flow, and assuming a rising volatility reading means money is flowing in. It does not, and a range explosion on thin volume is exactly the breakout that fades fastest. Finally, never optimise the 10 and 10 parameters to fit recent months. A setting you keep for a hundred trades teaches you something. A setting you re-pick every month teaches you nothing except how to overfit.
My daily routine with Chaikin Volatility
My volatility routine fits on one page, and I run it in the same order every day I trade the gauge. The evening before, I check the H4 gauge for EURUSD and note whether it is expanding, flat or contracting, because that decides whether breakouts are even on tomorrow’s list. In the morning I check the economic calendar and mark any red-folder release: no new volatility trade in the hour before or after it, since news spikes print fake gauge extremes. I then wait for the London session, watch for a price breakout with the H1 gauge above plus 25 percent and the H4 gauge agreeing, size it from the scaling grid, and place the stop and both targets with the entry, never after. When the trade closes, win or lose, I log the gauge reading, the smoothed range, and whether the stop came from the grid, because those three notes are what make the next month’s journal readable.
| Time | Action | Why it protects the account |
|---|---|---|
| Evening before | Note the H4 gauge regime and whether breakouts are allowed | Tomorrow’s trades start filtered, not improvised |
| Morning open | Mark red-folder releases; no trade in the hour around them | News spikes print fake gauge extremes |
| London session | Take only breakouts with H1 gauge above plus 25 percent and H4 agreement | Best liquidity, cleanest range read, no fading breakouts |
| At entry | Size from the scaling grid; stop under the range low; targets placed with the entry | Risk decided by maths, volatility decides the stop |
| After the trade | Log gauge reading, smoothed range and grid compliance | The journal tests the rules, not just the results |
Chaikin Volatility rewards the trader who treats it as a range gauge rather than a fortune teller. It does not predict where price will go. It measures, in one percentage number, whether the bars are getting wider or narrower, and it does that measurement cleanly enough to build rules around. Learn the formula, keep the 10 and 10 settings, trade only breakouts the gauge says have fuel, scale every stop to the reading and shrink the size to pay for it, stand aside when the gauge contracts, and never buy a spike. Do that, and a line most traders have never opened becomes one of the most honest tools on a funded account, which, for a trader whose job is surviving until payout, is exactly what you want. For the neighbouring guides, the Chaikin Money Flow guide shows the money receipt behind the same family name, and the EMA guide shows the slower trend line that pairs well with a volatility-filtered entry.
Frequently asked questions
What is Chaikin Volatility in simple terms?
It is a percentage gauge of whether bar ranges are expanding or contracting: it smooths the high-low range over 10 bars, compares it with the same smoothed range 10 bars ago, and reports the percentage change.
Is Chaikin Volatility the same as Chaikin Money Flow?
No. Money Flow measures volume-backed money flowing in or out, using closes and volume. Volatility measures only whether high-low ranges are widening or narrowing, with no volume input. They share a creator, not a calculation.
What settings should I use on a funded account?
Start with a 10-period EMA of the range and a 10-bar comparison, on H1 with an H4 confirmation. Do not trade it below H1, and do not re-optimise the parameters every month.
Does a rising gauge mean I should buy?
No. A rising gauge says ranges are widening, not that price will rise. A wide down bar raises the gauge just as much as a wide up bar. Use it as a filter for a price setup you already like, never as the setup itself.
Why does my breakout keep stopping out in a waking market?
Because a stop sized for a quiet market sits inside one average bar once ranges expand. Scale the stop with the gauge, using the grid in this guide, and shrink the position so the risk cap stays at 500 dollars.
Can Chaikin Volatility alone pass a prop firm challenge?
No indicator alone passes a challenge. Volatility is a regime filter that needs a price setup, a session filter, a higher-timeframe confirmation, a stop placed where its premise dies, and position sizing inside a daily loss limit. The challenge is passed by the rules around the indicator, not by the indicator itself.
Risk disclaimer: Trading on a funded account involves substantial risk of loss, and past results do not guarantee future results. The figures in this guide are from a demo journal and are for education only, not financial advice. Always check your firm’s current rules before trading.





1 comment
[…] Chaikin Volatility comparison matters because both indicators talk about volatility, but they measure different […]