On a Tuesday in late October I took three breakout trades before lunch and lost on all three. GBPUSD pushed above the Asian high at the London open, I bought it, and it fell back inside the range within twenty minutes. EURUSD did the same thing an hour later. Gold broke a small resistance level, I bought that too, and it faded before the next hourly candle had even closed. Three trades, three losses, and the damage was not the money — it was $1,500 against a $5,000 daily loss limit — it was the realisation that every one of those breakouts had looked identical on the price chart and identical on my indicators, and yet the market had treated them as noise. The price chart tells you where the breakout is; it never tells you whether anyone with real money is behind it, and on a funded account that second question is the one that decides whether the day ends in profit or in a breach.
In this article
- What Relative Volume Actually Measures
- The RVOL Formula, Worked in Plain Numbers
- RVOL, PVI, NVI and OBV: Four Volume Lines, Four Different Jobs
- Best Settings for Prop Firm Trading
- How to Read RVOL: the Bands That Decide Whether I Trade
- My Worked Trade: a 1.70R EURUSD Breakout on an RVOL 2.4 Morning
- The Sizing Grid: One Risk Budget, Every Stop Distance
- Twelve Trades With the Filter On — and Sixteen Without It
- When RVOL Fails: the Four Traps I Still Watch For
- My Daily Routine: RVOL Inside the Drawdown Rules
- Frequently Asked Questions
That afternoon I stopped adding indicators to my chart and started measuring something I had been ignoring: volume, not as a raw number, but as a ratio. Relative volume compares the volume on the current bar with the average volume at the same time of day over the last twenty sessions, and the answer is a single number — 0.4 means the market is asleep, 2.0 means twice the usual crowd is in the room, 3.0 means something unusual is happening. I rebuilt my breakout rule around that one number, traded it for twelve sessions, and the difference was not subtle: the same entries, the same stops, the same risk per trade, and the filtered run banked $4,000 while the unfiltered version of the same ideas banked $2,000. This article is the full method: what relative volume measures, the formula worked in plain numbers, the settings that fit a prop firm account, how to read its signals, a worked trade with the sizing maths, and the twelve-trade test that convinced me to keep it.
What Relative Volume Actually Measures
Relative volume, usually shortened to RVOL, measures how busy the market is right now compared with how busy it normally is at this exact time of day. It is a ratio, not a count: take the volume on the current bar, divide it by the average volume of the same bar over the last twenty sessions, and the result tells you whether today is ordinary, active, or extraordinary. A reading of 1.0 means the current bar is trading exactly its usual volume. A reading of 0.4 means it is trading at 40% of normal — the market is thin and quiet. A reading of 2.4 means it is trading at two and a half times its normal volume, which is the kind of participation that moves price and holds it there.
The time-of-day part is what makes the ratio honest. Raw volume is misleading on its own, because the market is never evenly busy: the London open always prints far more volume than the middle of the Asian session, and the New York open always prints more than the lunch hour. Comparing a London-open bar with a 3 a.m. bar tells you nothing. Comparing the 09:00 bar with the average of the last twenty 09:00 bars tells you everything, because the clock is held constant and only the participation changes. That is the whole insight in one sentence: RVOL does not ask how much volume there is; it asks how much volume there is for this hour, on this pair, on a normal day.
There is one honest caveat to state before anything else, because it changes how you use the indicator on forex. Spot forex has no central exchange, so the volume feed on your chart is usually your broker’s tick volume — the number of price changes in the bar — or a futures volume proxy. Tick volume is not true traded volume, but the ratio still works, because the comparison is internal: today’s tick count against the average tick count at the same hour on the same feed. The absolute number is a proxy; the ratio is real. I use RVOL as a filter that decides whether a setup is worth trading, never as an entry trigger on its own, and I never let a high reading override my stop.
The RVOL Formula, Worked in Plain Numbers
The formula is one division, and working it by hand once is the fastest way to trust it. First, collect the volume of the same bar over the last five sessions — five is enough to see the method, twenty is what I use live. Then average those five numbers. Then divide today’s volume by that average. The result is the RVOL reading for the bar, and the only decision is which side of 1.5 it falls on.
| Step | Calculation | My numbers |
|---|---|---|
| 1. Same-hour volumes, last 5 sessions | 09:00 EURUSD bars, Mon–Fri | 2,100 / 2,300 / 2,500 / 2,200 / 2,900 |
| 2. Average volume | (2,100 + 2,300 + 2,500 + 2,200 + 2,900) / 5 | 12,000 / 5 = 2,400 |
| 3. Today’s 09:00 volume | Tick volume on the live bar | 4,800 |
| 4. RVOL | Today’s volume / average volume | 4,800 / 2,400 = 2.00 |
| 5. The read | 2.00 is twice the usual crowd | Breakout is backed — tradeable |
Now run the quiet version of the same bar through the same table and the filter earns its keep. On the Tuesday I lost three trades, the GBPUSD London-open bar printed 960 ticks of volume against a twenty-session average of 2,400 for that hour. That is 960 divided by 2,400, which is 0.40. The breakout looked identical on price, but the room was empty: fewer than half the usual traders were participating, and a move built on that little participation has nothing holding it up. I bought it anyway, because the price chart said breakout and nothing on my screen disagreed. The ratio would have disagreed in one glance, and that is why it is now the first number I check before any breakout entry. For an independent statement of the same ratio and the same time-of-day rule, see Power Trading Group’s guide to using RVOL to filter high-probability setups.
The same arithmetic explains why the lookback matters. A five-session average is jumpy — one news day in the window lifts the average and makes ordinary days look quiet. A twenty-session average is stable enough that a single unusual day barely moves it, which is what you want from a baseline. I use twenty sessions on every timeframe I trade, and I never compare across sessions: the 09:00 bar is only ever compared with 09:00 bars, never with the 14:00 bar or the overnight bars. Mix the hours and the ratio stops meaning anything.
RVOL, PVI, NVI and OBV: Four Volume Lines, Four Different Jobs
Relative volume is not the only volume tool on my chart, and it is easy to confuse it with the cumulative volume lines I already use. The difference is what each one records. RVOL is a snapshot: how busy is this single bar, right now, compared with normal. The Positive Volume Index, the Negative Volume Index and On Balance Volume are all cumulative lines: they build a running record over days and weeks and tell you about the regime, not the moment. They answer different questions, and on a funded account I want both answers — the regime from the cumulative lines, and the moment from RVOL.
| Indicator | What it records | Timeframe of the answer | Its job on my account |
|---|---|---|---|
| Relative Volume (RVOL) | This bar vs its own 20-day average | One bar, right now | Filter: is this breakout backed? |
| Positive Volume Index (PVI) | Price change on rising-volume days only | Weeks — the crowd’s regime | Bias: what the public is pushing |
| Negative Volume Index (NVI) | Price change on falling-volume days only | Weeks — the quiet-money regime | Bias: what informed traders are doing |
| On Balance Volume (OBV) | Running total of volume by up/down days | Days to weeks — flow direction | Confirmation: is flow with the move? |
The practical difference shows up on the morning I described. On that Tuesday, my Positive Volume Index guide would have told me the crowd had been pushing price up for a week — a bullish regime, and correct as far as it went. My Negative Volume Index guide would have told me the quiet days were flat — no smart-money disagreement. My On Balance Volume guide would have shown flow rising with price. All three said the trend was fine, and all three were right about the trend. None of them could tell me that the specific 09:00 bar I was about to buy had 0.40 of its usual volume behind it. That is RVOL’s job and only RVOL’s job: the regime lines tell me which direction is safe to trade, and RVOL tells me whether this particular bar is worth trading at all.
That is also why RVOL does not replace any of them. A high RVOL reading inside a bearish regime is still a short I should not take long, and a low RVOL reading inside a bullish regime is a long I should wait on, not reverse. The tools stack in one order: PVI and NVI set the bias for the week, OBV confirms the flow for the day, and RVOL decides whether the next bar is tradeable. Used alone, RVOL is a loudness meter with no direction. Used last, it is the filter that kept my three losing breakouts off the blotter.
Best Settings for Prop Firm Trading
RVOL has only three settings that matter, and all three are chosen for the same reason: keep the baseline honest and the threshold strict enough that the filter actually filters. The lookback is twenty sessions, because that is long enough to be stable and short enough to adapt when a pair’s character changes. The comparison is always same-time-of-day, because mixing hours destroys the baseline. And the trade threshold is 1.5, because below that the participation is ordinary and the breakout is just price moving through a level on its own momentum.
| Setting | My value | Why this value | What breaks if you change it |
|---|---|---|---|
| Lookback period | 20 sessions | Stable baseline; one news day barely moves it | 5 sessions: jumpy baseline, false quiet reads |
| Comparison | Same time of day only | Volume has a daily rhythm; hours are not comparable | Any-hour average: London open always reads hot |
| Trade threshold | RVOL 1.5 or higher | 50% above normal is real participation, not noise | 1.0: filter never filters; 2.0: too few trades |
| Confirmation threshold | RVOL 2.0 or higher | Double volume confirms institutions are in | Treating 1.5 as confirmation: weaker breakouts |
| Session filter | London 08:00–11:00, New York 13:30–16:00 | Volume is real and deep in these windows | Asian session: thin baselines, noisy ratios |
| Volume feed | Broker tick volume, same feed always | Ratio is internal; feed changes break the average | Switching feeds mid-test: baseline resets |
Two of those rows deserve a longer explanation, because they are the mistakes I made first. The threshold at 1.5 is a compromise I arrived at by testing, not a number from a book. At 1.0 the filter never says no, because most bars sit near their average, so the rule adds nothing. At 2.0 the filter says no too often: on a $100,000 account trading two or three breakouts a day, a 2.0 threshold leaves roughly one trade a week, which is too few to build a payout on. At 1.5 the filter removes the empty breakouts — the 0.4 and 0.8 readings that failed me — while keeping the genuine ones. The 2.0 level still has a job: it is my confirmation level. A breakout at 1.5 is tradeable at normal size; a breakout at 2.0 or higher is the one I trust enough to hold for the second target instead of banking the first.
The session filter is the second mistake. My first week with RVOL I applied it in the Asian session, where the baselines are thin — a few hundred ticks — and a single large order can print an RVOL of 4.0 on a bar that means nothing. The ratio was mathematically correct and practically useless, because the baseline was too small for the ratio to be stable. I now run RVOL only in the London morning and the New York afternoon, when the baselines are deep and a 2.0 reading means thousands of extra ticks, not a handful. If your pair is an Asian-session pair, use the same rule with a longer lookback — thirty sessions — and a higher threshold of 2.0, because the thin baseline needs a bigger margin before you believe it.
How to Read RVOL: the Bands That Decide Whether I Trade
Once the settings are fixed, reading RVOL is a lookup, not a judgement call. Each band has one action attached to it, and I follow the band, not my feeling about the chart. The bands below are the ones I use on EURUSD and GBPUSD hourly bars; on gold the numbers run hotter, because gold’s volume spikes harder on news, so I add 0.5 to every threshold when I trade XAUUSD.
| RVOL reading | What it means | What I do | Prop firm angle |
|---|---|---|---|
| Below 0.5 | Dead market — less than half the usual crowd | No trade, no exceptions | A breakout here is a trap; the daily limit is at risk for nothing |
| 0.5 – 1.0 | Quiet — below normal participation | Wait for the next bar | Thin moves reverse fast; stops get hunted in the chop |
| 1.0 – 1.5 | Normal — an ordinary bar | Tradeable only with a second confirmation | Needs a structure break or a VWAP reclaim as well |
| 1.5 – 2.0 | Active — real participation arriving | Trade at normal size | Breakout has backing; standard risk applies |
| 2.0 – 3.0 | Strong — twice to three times normal | Trade, hold for the second target | Institutions are in; the move has follow-through |
| Above 3.0 | Extreme — news or a major event | Stand aside for 15 minutes | Spreads widen and stops slip; re-enter on the retest |
The bottom band is the one that saves accounts. A breakout on RVOL below 0.5 is the single most common way I used to lose money, because the move looks clean — price through a level, a nice candle, no resistance above — and the only thing wrong with it is invisible on the price chart. With nobody trading, the level breaks on air, and the first real order flow of the session pushes price straight back through it. I now treat a sub-0.5 reading as a hard no, the same way I treat a news spike as a hard no: not a judgement, a rule. The rule exists because the feeling that the breakout looks good is exactly what the trap relies on.
The top band is the one traders argue with, because an RVOL above 3.0 looks like the strongest signal of all. It usually is the strongest signal — and the most dangerous to chase. Above 3.0 the move is almost always a news event, and in the first fifteen minutes after news the spread on EURUSD can triple and the stop you planned can fill several pips worse than you set it. On a funded account that slippage is not a cost; it is drawdown against a hard daily limit, and it arrives on the trade you were most confident about. I stand aside for fifteen minutes, let the spread normalise, and re-enter on the retest if the level holds. The move is still there fifteen minutes later. The slippage is not.
My Worked Trade: a 1.70R EURUSD Breakout on an RVOL 2.4 Morning
The trade that sold me on RVOL happened on Tuesday 27 October, on EURUSD, and it is worth walking through bar by bar because every number in it is the method working as designed. The Asian range that night was 1.0920 to 1.0950, thirty pips wide. At 09:00 the London open pushed price above 1.0950, and the 09:00 bar printed 5,760 ticks of volume against a twenty-session average of 2,400 for that hour. That is 5,760 divided by 2,400, which is 2.40 — deep in the strong band, and the first time in two weeks I had seen a London-open breakout with real participation behind it.
| Step | Rule applied | My numbers |
|---|---|---|
| 1. Range | Asian session high and low | 1.0920 – 1.0950 (30 pips) |
| 2. Breakout | 09:00 bar closes above the range high | Close 1.0960, above 1.0950 |
| 3. RVOL check | Volume / 20-day same-hour average | 5,760 / 2,400 = 2.40 (strong band) |
| 4. Entry | Buy on the breakout close | 1.0960 |
| 5. Stop loss | Below the range high, 25 pips | 1.0935 |
| 6. Risk | 0.5% of a $100,000 account | $500 |
| 7. Position size | Risk / (stop in pips x $10 per pip per lot) | $500 / (25 x $10) = 2.00 lots |
| 8. First target | Range width above the breakout, half off | 1.0995 (+35 pips, 1.00 lot, +$350) |
| 9. Second target | 1.5x the range, rest off | 1.1010 (+50 pips, 1.00 lot, +$500) |
| 10. Result | Both targets hit by 11:30 | +$850 = 1.70R on $500 risk |
Run the sizing line again, because it is the line that protects the account. My risk budget for one trade is $500, which is 0.5% of the $100,000 account and one-tenth of the $5,000 daily loss limit — so ten losing trades in a day would breach me, and I will never take ten trades in a day. The stop is 25 pips below the entry, and one lot of EURUSD is worth $10 per pip, so the position size is $500 divided by 25 times $10, which is 2.00 lots. If the stop had been 50 pips away, the size would have been 1.00 lot for the same $500 of risk; the risk never changes, only the size does. That is the whole of position sizing for prop firm challenges in one division, and it is the reason a 25-pip stop and a 50-pip stop can both be correct trades on the same account.
What made this trade different from the three losers the week before was not the entry or the stop — those were the same rules — it was the 2.40. The breakout had twice the usual crowd behind it, and the follow-through showed it: price reached the first target in forty minutes and the second before lunch, with no deep pullback at any point. Compare that with the 0.40 breakout that failed me: same chart shape, same entry logic, and price fell back inside the range within twenty minutes because there was nobody there to hold it. The entry did not change. The crowd did. And on a funded account, the crowd is the trade.
The Sizing Grid: One Risk Budget, Every Stop Distance
RVOL decides whether I trade; the sizing grid decides how much. The grid below is the one I keep next to my screen, and it is built on a single fixed number: $500 of risk per trade, 0.5% of a $100,000 account. Every row answers the same question — if my stop is this far away, how many lots keep the risk at $500 — and the answer is always the risk divided by the stop distance in pips times $10 per pip per lot.
| Stop distance | Position size | Risk if stopped | When I use this row |
|---|---|---|---|
| 20 pips | 2.50 lots | $500 | Tight breakout, stop just inside the range |
| 25 pips | 2.00 lots | $500 | Standard range breakout — my usual trade |
| 30 pips | 1.67 lots | $501 | Wide range or a volatile morning |
| 40 pips | 1.25 lots | $500 | Gold breakout, or a news-day entry |
| 50 pips | 1.00 lot | $500 | Slow trend entry with a wide stop |
| 60 pips | 0.83 lots | $498 | Swing entry held overnight |
| 80 pips | 0.62 lots | $496 | Weekly-level breakout |
| 100 pips | 0.50 lots | $500 | Multi-day position, rarely used |
Two things about this grid are worth stating plainly. First, the small rounding differences — $501 on the 30-pip row, $498 on the 60-pip row — are real and I leave them visible, because lot sizes round to two decimals on most platforms and pretending the risk is exactly $500 on every row would be a lie. Second, the grid never changes with RVOL: a 2.4 reading does not earn a bigger position, and a 1.5 reading does not earn a smaller one. RVOL is a yes-or-no filter, not a sizing dial. The moment you start sizing up because the volume looks exciting is the moment a single failed breakout costs you double, and on a funded account that is how a normal losing day becomes a breach. The filter decides whether the trade happens at all; the grid decides the size; the two jobs never mix.
If your account is a different size, the grid scales by one multiplication: a $50,000 account with the same 0.5% rule risks $250 per trade, so every lot size in the grid halves. A $200,000 account risks $1,000, so every size doubles. What never scales is the discipline: the risk per trade stays at 0.5%, the daily loss limit stays at 5%, and the number of trades per day stays small enough that a full losing day cannot breach the account. My personal daily stop guide sets my own stop at $2,500 — half the firm’s $5,000 limit — which means five losing trades at $500 ends my day, and RVOL’s job is to make sure those five trades are the good ones.
Twelve Trades With the Filter On — and Sixteen Without It
The twelve-trade test ran from 3 to 19 November 2026, on EURUSD, GBPUSD and XAUUSD, in the London and New York sessions only. The rules were fixed before the first trade: RVOL 1.5 or higher to enter, a 0.5% risk per trade, the sizing grid above, and the same breakout setup every time — Asian range break, stop below the range high, first target at the range width, second target at one and a half times the range. The only difference between the two tables below is the filter: the first table is the twelve trades that passed RVOL, and the second table is what the same sixteen setups would have produced if I had taken every breakout regardless of volume.
| Date | Pair | RVOL at entry | Result | Dollars |
|---|---|---|---|---|
| Tue 3 Nov | EURUSD | 2.4 | +1.5R | +$750 |
| Wed 4 Nov | GBPUSD | 1.8 | +1.5R | +$750 |
| Thu 5 Nov | EURUSD | 1.6 | -1.0R | -$500 |
| Fri 6 Nov | XAUUSD | 3.1 | +2.0R | +$1,000 |
| Mon 9 Nov | EURUSD | 2.1 | +1.5R | +$750 |
| Tue 10 Nov | GBPUSD | 1.7 | -1.0R | -$500 |
| Wed 11 Nov | EURUSD | 2.8 | +1.5R | +$750 |
| Thu 12 Nov | XAUUSD | 2.2 | +1.0R | +$500 |
| Fri 13 Nov | EURUSD | 1.9 | -1.0R | -$500 |
| Mon 16 Nov | GBPUSD | 2.6 | +1.5R | +$750 |
| Tue 17 Nov | EURUSD | 2.0 | +1.5R | +$750 |
| Wed 18 Nov | GBPUSD | 1.5 | -1.0R | -$500 |
| Version | Trades | Wins / Losses | Net R | Net dollars | Best day vs net |
|---|---|---|---|---|---|
| RVOL filter on (1.5+ only) | 12 | 8 / 4 | +8.0R | +$4,000 | $1,000 / $4,000 = 25.0% |
| No filter (all 16 setups) | 16 | 8 / 8 | +4.0R | +$2,000 | $1,000 / $2,000 = 50.0% |
| What the filter was worth | 4 fewer trades | 4 fewer losses | +4.0R | +$2,000 | Consistency gate passed vs failed |
Read the last row of the second table carefully, because it is the number that matters for a funded account. The filter did not find better winners — the eight filtered wins are the same eight wins that appear in the unfiltered column, and the four filtered losses are four of the eight unfiltered losses. What the filter did was remove four trades, and all four of them were losers: the 0.4, 0.7, 0.9 and 1.1 readings that looked like breakouts and were not. Removing four losers and nothing else turned $2,000 into $4,000, and it did something else that the dollar figure hides: it fixed the consistency maths. On the filtered run my best day was $1,000 out of $4,000 of net profit, which is 25.0% — inside the 30% consistency ceiling most firms enforce. On the unfiltered run the same $1,000 best day against $2,000 of net profit is 50%, which would have failed the consistency rule outright. The filter did not just make more money; it made the money withdrawable. My consistency rule guide explains that ceiling in full, but the short version is this: a payout needs a best day under 30% of the total, and a filter that removes losers is the cheapest way to get there.
One more honest note about this test: twelve trades is a small sample, and I am not claiming RVOL wins eight out of twelve forever. What twelve trades can show is the mechanism — empty breakouts fail, backed breakouts follow through — and the mechanism is visible in every single row: the four trades the filter removed were the four lowest readings, and the four lowest readings were all losers. That is not luck; it is the definition of the indicator working. A bigger sample will change the percentages. It will not change the mechanism.
When RVOL Fails: the Four Traps I Still Watch For
RVOL is a filter, not a guarantee, and it has four failure modes I have met in person. Each one has a specific countermeasure, and the countermeasure is always the same kind of thing: a second condition that has to be true before the trade happens. A filter that never fails is a filter you have not used long enough.
| Trap | What happens | How it cost me | The countermeasure |
|---|---|---|---|
| News-spike RVOL | Volume explodes on a data release, price whipsaws both ways | A 3.8 reading on a CPI morning, stopped out in 4 minutes | Above 3.0: stand aside 15 minutes, re-enter on the retest |
| Thin-baseline RVOL | Asian-session baseline is tiny, so any order prints a huge ratio | A 4.2 reading on a 300-tick baseline, breakout faded instantly | Trade RVOL only in London and New York sessions |
| High RVOL, wrong direction | Volume confirms a move against my bias — a sell-off, not a breakout | Bought a 2.2 upside break inside a downtrend, stopped out | RVOL never overrides the PVI/NVI regime bias |
| Volume without a level | High RVOL on a random bar with no structure behind it | Chased a 2.0 bar mid-range, price went nowhere | RVOL only counts at a real level: range high, VWAP, or prior high |
The third trap is the one worth lingering on, because it is the most tempting. A high RVOL reading feels like permission — the crowd is here, the move is real, trade it — but the crowd can be real and still be going the other way. On the day I bought the 2.2 upside break inside a downtrend, the volume was genuine: sellers were active, the bar was busy, and the breakout was backed by real participation. It was backed by sellers. The PVI line had been falling for a week and the NVI line was flat, and both of them were telling me the regime was bearish. I traded against the regime because the volume looked exciting, and the trade failed exactly as the regime said it would. RVOL measures participation, not direction. Direction comes from the regime lines, and no reading on any single bar overrules them.
The fourth trap is the quietest: volume without a level. A 2.0 reading in the middle of nowhere — no range high, no prior high, no VWAP line — is just a busy bar. Busy bars happen all day in the London session for no reason at all, and trading them is the same as trading noise with a fancy justification. My rule is that RVOL only counts at a level I drew before the session started. If the level was not on my chart at 08:00, the RVOL reading at 10:30 does not create a trade.
My Daily Routine: RVOL Inside the Drawdown Rules
RVOL is a small part of my day, and it works because it sits inside a routine that protects the account first and looks for trades second. The routine below is the one I run every morning, in this order, and the RVOL check is step four — after the account checks, after the regime check, and before any entry. The order is deliberate: a trader who checks volume before checking the daily loss limit is a trader who will eventually take a beautiful high-RVOL trade on a day when the account had no room left for it.
| # | Step | What I check | My rule |
|---|---|---|---|
| 1 | Account health | Drawdown used so far today | Personal stop $2,500; firm limit $5,000 |
| 2 | Regime bias | PVI and NVI direction for the week | Trade with the bias only, never against it |
| 3 | Levels | Asian range, prior highs and lows, VWAP | Drawn before 08:00; no new levels mid-session |
| 4 | RVOL at the level | Current bar vs 20-day same-hour average | 1.5 or higher to trade; below 0.5 is a hard no |
| 5 | Sizing | Stop distance from the sizing grid | $500 risk, 0.5% of the account, always |
| 6 | News check | High-impact releases in the next hour | No entry 15 minutes either side of the release |
| 7 | Journal | RVOL reading recorded with every trade | Review weekly: which band actually paid? |
Step seven is the one that keeps the method honest. Every trade in my journal carries its RVOL reading next to the result, and once a week I sort the journal by band and ask one question: which band actually paid this week? If the 1.5 to 2.0 band stops paying and the 2.0 to 3.0 band keeps paying, the threshold moves. If the Asian session starts printing reliable readings on a thirty-session lookback, the session filter loosens. The method is a living rule, not a carved one — but it changes on evidence from my own journal, never on a feeling from a single trade. And when the daily stop is hit, the routine ends: I close the platform, because no RVOL reading, however strong, is worth a breach. The max daily drawdown calculator is the tool I use to check the numbers before the session starts, and it is the fastest way to see exactly how much room the account has left.
Frequently Asked Questions
What is relative volume in trading?
Relative volume, or RVOL, is the ratio of the current bar’s volume to the average volume at the same time of day over the last twenty sessions. A reading of 1.0 means normal volume, 0.5 means half the usual crowd, and 2.0 means twice the usual crowd. It tells you whether a move has real participation behind it, which is the question a price chart alone cannot answer.
What is a good RVOL reading for a breakout trade?
On a funded account I want 1.5 or higher before I trade a breakout, and 2.0 or higher before I trust it enough to hold for a second target. Below 1.0 the breakout is trading on ordinary or thin participation and usually fades; below 0.5 I do not trade at all. Above 3.0 I stand aside for fifteen minutes, because the reading is almost always a news event with wide spreads and slippage.
Does relative volume work on forex, where there is no central volume?
Yes, with one caveat: spot forex volume is usually tick volume from your broker, not true traded volume. The ratio still works because the comparison is internal — today’s tick count against the average tick count at the same hour on the same feed. Treat the reading as a proxy for participation, use it as a filter rather than a trigger, and never let it override your stop or your regime bias.
How is RVOL different from OBV and the Positive Volume Index?
RVOL is a snapshot of one bar, right now, against its own average. OBV, the Positive Volume Index and the Negative Volume Index are cumulative lines that build over days and weeks and describe the regime — who is pushing price and in which direction. I use the cumulative lines to set my bias for the week and RVOL to decide whether the next bar is worth trading. They answer different questions and work best together.
Can RVOL alone tell me when to buy or sell?
No. RVOL measures participation, not direction: a high reading on a sell-off is just as real as a high reading on a rally. It is a filter that decides whether a setup is tradeable, never an entry signal on its own. Every RVOL trade still needs a level, a direction from the regime bias, a stop, and a position size from the grid — the ratio only answers whether the crowd is in the room.
What RVOL settings should a prop firm trader use?
A twenty-session lookback, compared at the same time of day only, with a 1.5 threshold to trade and 2.0 for confirmation, applied in the London and New York sessions. A five-session lookback is too jumpy, comparing across hours destroys the baseline, and a 1.0 threshold never filters anything. On gold, add 0.5 to every threshold, because its volume spikes harder than the currency pairs.
Risk disclaimer: This article is educational only and not financial advice. Prop firm accounts are simulated evaluations with strict loss limits; never risk money you cannot afford to lose, and always check your firm’s current rules before trading.




