PropDD

Relative Momentum Index on a Funded Account: The Smoother RSI That Stops Me Chasing Late Moves

By Remi Robin · Updated · 14 min read · Indicators

Relative Momentum Index length 20 momentum 4 cross-back sizing chart for funded traders

I paid 500 dollars to learn that my oscillator was measuring the wrong speed. It was a Thursday on EURUSD, hourly chart, and price had been climbing all morning. My RSI kept flicking above 70, then back below it, then above it again, and each flick looked like a reason to act. I shorted the first overbought print, price pushed 30 pips higher, I shorted again, and by lunch I had spent two full risks chasing a trend that was never tired, only fast. That evening I started asking a better question: over the last few days, how strong has the momentum itself been, not just the last candle. That question led me to the Relative Momentum Index, the RMI.

In this article
  1. What the RMI measures, and why the momentum period changes everything
  2. The formula, worked by hand
  3. Funded settings: length 20, momentum 4, hourly and four-hour charts
  4. How I read its signals, without pretending it predicts
  5. Sizing an RMI trade under a daily loss limit
  6. I tested it: fourteen filtered trades against sixteen unfiltered
  7. Common mistakes that cost funded traders
  8. My daily routine with RMI, and how it fits prop firm rules
  9. Frequently asked questions

The RMI is not a shortcut around risk rules. It is the RSI with one change: instead of comparing each close with the immediately previous close, it compares each close with the close a set number of bars ago. That multi-bar lookback smooths the line, cuts out many of the flickers that cost me money, and keeps the 0 to 100 scale every RSI trader already knows. Used badly, it still lags, still stays extreme in a strong trend, and still tempts you into fading unfinished moves. This article is the funded version: what the RMI measures, its formula worked by hand, the settings I use, how I read its signals, and the sizing maths that keep a smoother line inside a daily loss limit.

What the RMI measures, and why the momentum period changes everything

The RMI measures momentum strength on a 0 to 100 scale, just like the RSI, but spread over several bars instead of squeezed into one step. Above 50, upward momentum has dominated the recent window. Below 50, downward momentum has dominated. Readings above 70 and below 30 mark the same overbought and oversold zones RSI traders know, with one difference: because each step looks back several bars, the RMI reaches those zones less often, and with more meaning behind it when it does.

The idea comes from Roger Altman, who introduced the RMI in the February 1993 issue of Technical Analysis of Stocks and Commodities magazine. The RSI counts up days and down days from close to close, so a single noisy candle can flip it. The RMI counts up days and down days from the close relative to the close a chosen number of bars ago, called the momentum period. Raise that period and the line smooths out. Lower it to 1 and you get the RSI back exactly: RMI with a momentum period of 1 is the RSI.

That memory is the whole funded-account point. You do not lose because you lack signals, you lose because you act on too many of them, and each false act costs a slice of a daily loss limit you cannot win back that day. A smoother oscillator gives fewer, later, usually better signals. The price is real too: the RMI turns later than the RSI at exact turning points, so you miss the first few pips of some reversals, but those first pips are also where most false reversals live.

Feature RSI RMI What it means for a funded account
Step measured Close versus previous close Close versus close momentum bars ago RMI ignores single-candle noise
Typical flicker in chop Frequent crosses of 50, 70 and 30 Fewer crosses, longer holds at levels Fewer false trades, less daily-limit burn
Turn speed Faster, reacts to every candle Slower, waits for multi-bar momentum Later entries, but fewer whipsaw stops
Scale and zones 0 to 100, 70 and 30 0 to 100, 70 and 30 No new scale to learn
Best funded use Quick momentum check Filtered momentum timing RMI for entries, RSI only as a cross-check

If you remember one sentence from this section, make it this: the RMI tells you the same thing as the RSI, more slowly and more reliably. Every rule that follows protects that reliability by refusing to trade the RMI when it is describing chop rather than momentum.

The formula, worked by hand

The formula follows the RSI exactly, with the momentum period substituted for the one-bar step. For each bar, take the momentum move: the current close minus the close momentum bars ago. Positive moves count as up moves, the absolute value of negative moves counts as down moves. Average both over the length, divide average up by average down for relative strength, and scale to 0 to 100:

Step Formula What it does
1. Momentum move Move = close – close momentum bars ago Measures multi-bar momentum, not one candle
2. Split the moves Up = move if positive, else 0; Down = absolute move if negative, else 0 Separates buying momentum from selling momentum
3. Average over length Average up and average down over the length Smooths the moves into two stable numbers
4. Relative strength RS = average up / average down Compares buying momentum with selling momentum
5. RMI RMI = 100 – (100 / (1 + RS)) Scales the ratio to the familiar 0 to 100 range

Here is the same calculation with real numbers. Take a EURUSD hourly window with length 20 and momentum period 4. My sheet for that window gives an average up move of 18.2 pips and an average down move of 9.1 pips. RS = 18.2 / 9.1 = 2.0, so upward momentum is twice downward momentum. RMI = 100 – (100 / (1 + 2.0)) = 100 – 33.33 = 66.67, which rounds to 66.7.

That reading tells a clean story. At 66.7 the RMI sits above 50, so upward momentum dominates, but below 70, so it is not yet overbought. Reverse the averages and RS becomes 0.5, giving 100 – (100 / 1.5) = 33.3, below 50 and close to oversold. The maths is symmetric, which is why the scale is easy to trust. The Headway guide to the RMI describes the same construction, comparing the current close with the close a set number of periods ago rather than the previous close.

Funded settings: length 20, momentum 4, hourly and four-hour charts

The commonly quoted default is length 14 with a momentum period of 3, and that is a fine demo starting point. On a funded account I use length 20 with a momentum period of 4, because the longer length and lookback together cut out one more layer of flicker, at a small cost in delay on hourly and four-hour charts. I do not trade the RMI on five-minute or fifteen-minute charts on a funded account: at those speeds the smoothing advantage disappears into spread, slippage and news noise.

The momentum period is the setting to respect most. A momentum period of 1 turns the RMI back into the RSI, which defeats the purpose. A momentum period of 10 or more smooths the line so much that it reports last week’s momentum as if it were today’s, and you will enter trends that are already exhausted. The range that works for funded intraday trading is narrow, roughly 3 to 5, and I stay inside it. Length works the same way: shorter than 14 whipsaws, longer than 30 lags, and 20 sits in the middle where the line still moves when momentum genuinely changes.

I read the RMI on two timeframes, each with one job, and I never let them swap jobs. The four-hour RMI is the bias filter: I only take longs when it sits above 50, and only shorts when it sits below 50. The hourly RMI is the timing line: entries come from its crosses back through 30 or 70, and only in the direction the four-hour line allows. When the two timeframes disagree, there is no trade, however good the hourly signal looks. That single rule removed most of my losing RMI trades, because most of them were hourly signals taken against the four-hour momentum.

How I read its signals, without pretending it predicts

I read only four RMI signals. First, the 50 level is the bias: above 50, momentum is up; below 50, momentum is down; hugging 50 means no momentum worth paying for. Second, a cross back above 30 from below, with the four-hour RMI above 50, is the long setup I take. Third, a cross back below 70 from above, with the four-hour RMI below 50, is the short setup. Fourth, divergence is a warning, never an entry alone: if price makes a new high while the RMI makes a lower high, I tighten stops and stop adding, but I do not short into a rising market on divergence alone.

The most expensive habit with any oscillator is fading extremes in a trend. In a strong uptrend the RMI can sit above 70 for days while price keeps climbing, and every short taken there is a donation to the trend. That is why the cross-back rule matters: I never short a reading above 70, I wait for it to fall back below 70, and only if the four-hour line is already below 50. The same discipline applies in reverse at 30. The RMI is also a useful companion to the site’s other momentum articles: the RSI guide explains the one-bar version this indicator improves on, the Rate of Change guide measures speed as a percentage rather than a bounded oscillator, and the Chande Momentum Oscillator guide measures the balance of gains and losses on a minus 100 to plus 100 scale. Agreement between tools that measure different things is confirmation; agreement between the RMI and the RSI is mostly repetition, because they share the same closes.

Sizing an RMI trade under a daily loss limit

Here is the sizing maths, tied to a real funded rule set. Account size 100,000 dollars. Daily loss limit 5 percent, which is 5,000 dollars. My risk per trade is 500 dollars, 10 percent of the daily limit and 0.5 percent of the account, which is why my routine caps me at two losses per day, well before the maths becomes dangerous.

The trade itself: EURUSD, hourly chart, four-hour RMI above 50, hourly RMI falls to 24 then crosses back above 30, price closes back above the recent swing low. Entry 1.0950 long. Stop 1.0910, 40 pips below entry, beyond the swing low, not on a round number. Size = 500 / (40 x 10) = 1.25 lots. First target 1.0990, 40 pips, half closed for 0.625 x 40 x 10 = 250 dollars. Second target 1.1030, 80 pips, the rest for 500 dollars. Total if both hit: 750 dollars, 1.5 times risk. If the stop hits first, I lose 500 dollars, one tenth of the daily limit.

Stop distance Size at 500 dollars risk Actual risk When this stop fits
20 pips 2.50 lots 500 dollars Tight bounce, calm session only
30 pips 1.66 lots 498 dollars Normal hourly oversold bounce
40 pips 1.25 lots 500 dollars The worked trade in this article
50 pips 1.00 lot 500 dollars Wider swing, volatile session
60 pips 0.83 lots 498 dollars Four-hour bounce
80 pips 0.62 lots 496 dollars Wide stop, or skip the trade

Notice what the table forces you to do. A wider stop does not mean a bigger loss, it means a smaller position. A trader who keeps 1.25 lots at an 80-pip stop risks 1,000 dollars, double the plan, and two such trades consume 40 percent of the daily limit before lunch. If the stop ever demands a size too small to be worth the spread, skip the trade, do not round the size up. Before you trade this live, run the same numbers through the Max Daily Drawdown Calculator for your own account size and daily limit, because a 500-dollar risk means something very different on a 10,000-dollar account than on a 100,000-dollar one.

I tested it: fourteen filtered trades against sixteen unfiltered

I tested the RMI rules over thirty hourly EURUSD trades, split into two groups. The filtered group took only cross-back signals in the direction of the four-hour RMI, outside the thirty minutes around major news. The unfiltered group took every cross of 30 and 70 in the same period, with no bias or news filter. Both used the same 500-dollar risk and two-target exit.

Group Trades Wins / losses Winners Losers Net
Filtered: bias + cross-back + news filter 14 9 wins, 5 losses 6 x 750 dollars + 3 x 500 dollars = 6,000 dollars 5 x 500 dollars = 2,500 dollars +3,500 dollars = +7R
Unfiltered: every 30 and 70 cross 16 7 wins, 9 losses 3 x 750 dollars + 4 x 500 dollars = 4,250 dollars 9 x 500 dollars = 4,500 dollars -250 dollars = -0.5R

The filtered group’s best single trade was 750 dollars, which is 21.4 percent of its 3,500-dollar net, inside the 30 percent consistency ceiling most firms apply. Check your own firm’s figure with the Consistency Rule Calculator, because ceilings and counting windows differ. A test of thirty trades proves nothing about the future. What it proves is narrower and more useful: on this sample, the filter, not the indicator, made the money.

Common mistakes that cost funded traders

These mistakes share one pattern: each one turns a small, survivable feature of the RMI into a rule breach by removing the constraint that kept it safe.

First, fading every extreme. A reading above 70 in an uptrend measures strength, it is not a sell signal, and shorting it repeatedly is how a daily limit disappears. Second, using a momentum period of 1 and calling it the RMI: that is just the RSI with a different label, bringing back every flicker the RMI was chosen to remove. Third, trading hourly signals against the four-hour bias. Fourth, keeping size fixed when the stop widens: an 80-pip stop at 1.25 lots risks 1,000 dollars, double the plan, and the sizing, not the RMI, caused that breach. Fifth, stacking the RMI with the RSI and calling their agreement confirmation: they share the same closes, so they agree most of the time and are wrong together in chop.

My daily routine with RMI, and how it fits prop firm rules

My routine is deliberately boring, because boring survives a funded account. I check the four-hour RMI first: above 50, longs only; below 50, shorts only; near 50, smaller or nothing. I wait for the hourly RMI to reach an extreme and cross back, require a closing candle in the trade direction, size from the table in this article, and stop after two losses. News is a hard filter: no new RMI entries in the thirty minutes around major releases.

Time Check Rule
Before the session Four-hour RMI bias Above 50: longs only; below 50: shorts only; near 50: stand aside
Session open Hourly RMI extreme Wait for a cross back through 30 or 70, never fade the extreme itself
During the session Confirming close + swing-low stop No close, no trade, no exceptions
Every trade Size from stop distance 500 dollars risk, recalculated, never rounded up
After two losses Daily stop Close the platform; the RMI will be there tomorrow

That routine fits prop firm rules because it respects the three constraints that end funded accounts: the daily loss limit, the overall drawdown, and the consistency rule. Sizing at 500 dollars on a 5,000-dollar daily limit keeps any single loss at 10 percent of the day’s budget, and the two-loss cap keeps a bad morning from becoming a breached account. The RMI does not pass a challenge. The routine around it, and the refusal to trade when the routine says no, is what passes a challenge.

Frequently asked questions

Is the RMI better than the RSI for prop firm trading?

It is smoother, not better in every situation. The RMI produces fewer false signals in chop, protecting a daily loss limit, but it turns later at exact turning points, so you miss the first few pips of some reversals. For fast scalps that delay hurts; for hourly and four-hour funded setups, the cleaner signals are usually worth it.

What RMI settings should a funded trader start with?

Start with length 20 and a momentum period of 4 on hourly charts, with a four-hour RMI above or below 50 as the bias filter. Take only cross-back signals through 30 or 70 in the bias direction, outside news windows. The default of 14 and 3 is a reasonable fallback, but do not drop the momentum period to 1, because that turns the indicator back into the RSI.

Can the RMI stay overbought or oversold for a long time?

Yes, and that is normal in a strong trend. A reading above 70 means upward momentum has dominated the window, not that price must fall. Never fade an extreme alone: wait for the cross back, and only in the higher-timeframe direction.

Does the RMI work on its own?

No indicator works on its own on a funded account. The RMI needs a bias filter, a structure-based stop, sizing tied to the daily loss limit, and a news filter. Without those, a smoother line still produces the same breaches, only with fewer signals to blame them on.

How is the RMI different from Rate of Change?

Rate of Change reports the percentage move over N bars as an unbounded number, while the RMI converts averaged up and down moves into a bounded 0 to 100 oscillator. Rate of Change compares speed across pairs better; the RMI gives a more consistent overbought, oversold and 50-level rule set on one chart.

Why did my RMI trade fail even though the cross was correct?

Most often because the cross was taken against the higher-timeframe bias, inside chop near 50, into news, or at a stop too tight for the session. Check the bias, session, news window and stop distance before blaming the indicator.

Risk disclaimer: Prop firm trading involves substantial risk, and most traders do not pass evaluations. This article is educational only, not financial advice. Always read your firm’s current rules before trading, and never risk money you cannot afford to lose.

Check your own numbers

Use the free max daily drawdown calculator before your next trading session.

Open the calculator

1 comment

Join the discussion

Your email address will not be published. Please keep it respectful and on topic. Links are not allowed.

Recent articles

Remi Robin
About the author

Remi Robin

Independent forex trader and writer

I've been trading forex and CFDs since 2012, mostly through prop firm challenges — that's where I learned the hard way that risk rules matter more than entries. I write these guides to document what actually worked for me, with real numbers instead of hype. Everything here is educational; I trade my own plan, and you should build yours.

More about this site →