PropDD

%B on a Funded Account: The Position Gauge That Tells Me Where Price Sits Inside the Bollinger Bands

By Remi Robin · Updated · 16 min read · Indicators

Percent B position gauge 0.75 upper middle lower band chart for funded traders

I lost 620 dollars on a Wednesday morning because I bought what looked like a strong breakout and never asked the one question that would have stopped me: where, exactly, was price sitting inside its own Bollinger Bands? EURUSD had pushed above the upper band, the candle looked powerful, and I joined it at full size. What I did not notice was that the push had already spent itself. Price had been walking the upper band for six candles, the move was stretched, and the next candle pulled straight back to the middle band. My stop was 50 pips away, my size was built for a fresh trend, and the pullback took the whole risk before the trend ever resumed. The breakout was real. My entry was late, and late entries are what kill funded accounts, because a funded account does not forgive a full-size loss taken at the worst possible moment.

In this article
  1. What Percent B actually measures
  2. The formula, worked by hand
  3. The settings I use on a funded account
  4. How to read its signals without falling for the overbought trap
  5. A worked trade, sized under the daily loss limit
  6. The twelve-trade test: filtered versus unfiltered
  7. The mistakes that cost funded traders money here
  8. How Percent B fits prop firm rules
  9. Frequently asked questions

Percent B, written %B, is the one number that answers that question before you click buy. It tells you where the close sits inside the Bollinger Bands on a scale from 0 to 1: 0 is the lower band, 0.5 is the middle band, and 1 is the upper band. A reading above 1 means price closed above the upper band, and a reading below 0 means it closed below the lower band. That is all it does, and that is exactly why it belongs on a funded account. It turns a chart impression — “this looks stretched” — into a number you can put a rule around, and rules are what keep a trader inside a daily loss limit when a breakout tempts them to chase.

This guide covers the indicator properly: what %B measures, its formula worked by hand, the settings I use on a funded account, how to read its signals without falling for the overbought trap, a worked pullback trade with every number shown, a sizing grid tied to a 500-dollar per-trade risk cap, a twelve-trade test of a simple %B filter, the mistakes that cost funded traders money here, and how the whole thing fits prop firm drawdown and consistency rules. Everything uses a 100,000-dollar funded account with a 5,000-dollar daily loss limit and a 500-dollar per-trade risk cap, checked against the max daily drawdown calculator wherever the daily limit is in play. If you already read the Bollinger Bands guide on this site, this is the companion piece that turns those three lines into a single readable number, and if you read the Bollinger BandWidth guide, remember the split: BandWidth tells you how wide the bands are, while %B tells you where price sits inside them. You need both questions answered before a funded trade, and they are different questions.

What Percent B actually measures

Percent B does not measure direction, and it does not measure volatility. Direction is the job of the trend, and volatility is the job of BandWidth. Percent B measures position: how far the latest close has travelled from the lower band toward the upper band, expressed as a fraction of the whole distance between the two bands. When price sits on the middle band, %B reads 0.50. When it sits three quarters of the way up, %B reads 0.75. When it closes outside the bands, the reading leaves the 0 to 1 range altogether, which is itself information: the market has pushed beyond two standard deviations from its own 20-period average.

The funded-account reason this matters is timing. Most funded losses I have taken on Bollinger setups were not caused by a wrong trend call. They were caused by entering a trend after it had already run to the far edge of its range, so that the normal pullback back toward the middle band was large enough to stop me out. %B makes that error visible before the trade. A long entry with %B at 1.12 is not the same trade as a long entry with %B at 0.45, even if the chart pattern looks identical, because the first entry has no room left before a routine pullback, while the second entry has the whole middle of the range to work with. On a funded account, position inside the range is a risk input, not a curiosity.

There is one more thing %B measures that traders miss: persistence. In a strong uptrend, %B does not hover politely around 0.50. It lives in the top half of the range, often between 0.70 and 1.10, and it can stay there for many candles while price walks the upper band. That behaviour is the reason the classic overbought reading fails on funded accounts. A %B reading above 1 is not automatically a sell signal. In a trend it is often a strength signal, and selling it because the number looks high is how traders fight a trend with a funded account and lose a little every day until the daily limit ends the argument.

The formula, worked by hand

The formula is short, and you should be able to do it on a calculator before you trust any platform to plot it for you. Fidelity’s Percent B guide confirms the same reading: 100 at the upper band, 50 at the moving average, and zero at the lower band, with negative values below the lower band. First you need the three Bollinger lines: a 20-period simple moving average as the middle band, plus and minus two standard deviations of the same 20 closes for the upper and lower bands. Then %B is the distance from the lower band to the close, divided by the full distance between the bands.

Step Calculation Worked value
Middle band 20-period simple moving average of closes 1.1000
Standard deviation Standard deviation of the same 20 closes 0.0040 (40 pips)
Upper band Middle band + (2 x standard deviation) 1.1000 + 0.0080 = 1.1080
Lower band Middle band – (2 x standard deviation) 1.1000 – 0.0080 = 1.0920
Percent B (Close – lower band) / (upper band – lower band) See the three closes below

Now take three closes against those same bands. A close at 1.1040 gives (1.1040 – 1.0920) / (1.1080 – 1.0920) = 0.0120 / 0.0160 = 0.75: price is three quarters of the way up the range, strong but not yet at the edge. A close at 1.1100 gives (1.1100 – 1.0920) / 0.0160 = 0.0180 / 0.0160 = 1.125: price has closed above the upper band, and the reading has left the normal range. A close at 1.0900 gives (1.0900 – 1.0920) / 0.0160 = -0.0020 / 0.0160 = -0.125: price has closed below the lower band. The same formula, three very different funded decisions: the first close is a healthy uptrend position, the second is a stretched position that needs confirmation before chasing, and the third is a breakdown that no pullback rule should be buying into.

The settings I use on a funded account

I use the standard Bollinger settings, because %B inherits its settings from the bands and changing them without a reason only adds noise to a funded routine. The standard is a 20-period simple moving average with two standard deviations. On an H1 chart that is roughly one trading day of hourly closes, which fits a funded trader who holds trades for hours rather than minutes. On H4 the same settings span about four trading days, which suits a slower pullback approach. I do not use %B on M5 or M15 for funded entries: the bands re-form so quickly at those speeds that the reading jumps between 0 and 1 on ordinary noise, and a number that changes its mind every few minutes cannot protect a daily loss limit.

Setting My funded value Why
Chart timeframe H1 for entries, H4 for trend Hourly closes are slow enough to filter noise, fast enough to act
Band period 20 Standard Bollinger period; keeps %B comparable across pairs
Standard deviations 2 Standard width; wider settings make %B sluggish, narrower make it jumpy
Trend filter H4 close above its 50-period average for longs %B pullbacks only in the direction of the higher-timeframe trend
Width check BandWidth rising or normal, never a dead squeeze In a squeeze, tiny moves swing %B from 0 to 1 and mean nothing
Session filter London and New York overlap only for entries Thin Asian-hour %B extremes reverse on noise too often

The two filters in that table do most of the funded work. The trend filter stops buying a low reading in a downtrend because 0.10 “looks cheap”, and the width check stops treating a %B swing inside a squeeze as a signal at all, since a 10-pip move can carry %B from edge to edge when the bands are tight.

How to read its signals without falling for the overbought trap

Reading %B starts with the zones, but the zones are starting points, not orders. The table below is how I read them on a funded account, with the funded action attached to each zone so the number always leads to a decision rather than a feeling.

Percent B zone What it means Funded action
Above 1.00 Close above the upper band; stretched or strongly trending Do not chase a fresh long; wait for a pullback toward 0.50
0.80 to 1.00 Upper-band strength; price near the top of its range Hold winners, do not add; new longs need a pullback first
0.50 to 0.80 Healthy upper-half position; normal uptrend territory Best zone for pullback entries once %B turns back up
0.20 to 0.50 Lower-half position; pullback in progress or trend weakening Watch for the turn; buy only when %B crosses back above 0.50
0.00 to 0.20 Lower-band pressure; oversold or breakdown territory No fresh long in a downtrend; in an uptrend, wait for confirmation
Below 0.00 Close below the lower band; breakdown or capitulation Stand aside; a close back inside the bands is the first sign, not the entry

The entry rule I actually trade is narrow, and narrow is the point. In an H4 uptrend, I wait for %B to dip into the 0.20 to 0.50 zone on H1, then I wait again for it to cross back above 0.50 on a closing candle. That two-step sequence — dip, then recovery — is the whole signal. The dip alone is not an entry, because a dipping %B can keep dipping all the way below zero in a trend change. The recovery cross is the evidence that buyers have stepped back in, and it gives me a clean invalidation level: the low of the dip. If price breaks that low, the recovery has failed and I am out, with a loss I sized in advance.

A worked trade, sized under the daily loss limit

Here is the trade exactly as I would take it, with every number shown, because a funded article that hides its sizing is not teaching anything. The account is 100,000 dollars, the daily loss limit is 5,000 dollars, and my per-trade risk cap is 500 dollars, which is 10 percent of one day’s allowance. Ten losing trades at full risk would end my day, so no single trade is allowed to matter more than that, and the sizing below respects it.

The setup: EURUSD in an H4 uptrend, H1 %B dips to 0.32 during the London session, then closes back above 0.50 at 1.0960. I enter long at 1.0960. The dip low is 1.0910, so my stop goes just below it at 1.0910, which is 50 pips of risk. Position size is risk divided by stop distance in dollars: 500 dollars / (50 pips x 10 dollars per pip for one standard lot) = 1.00 lot. I split the exit: half out at 1.1010, which is 50 pips and 1R, and the rest out at 1.1060, which is 100 pips and 2R. The first half banks 250 dollars, the second half banks 500 dollars, for a total of 750 dollars, or 1.5R on the full position. If the recovery fails and the dip low breaks, I lose the planned 500 dollars and nothing more, because the stop was set from the setup, not from my feelings about the trade.

Trade element Value Maths
Entry (long) 1.0960 H1 close back above %B 0.50 after a dip to 0.32
Stop loss 1.0910 Dip low; 50 pips of risk
Position size 1.00 lot 500 / (50 x 10) = 1.00
First target 1.1010 (half position) +50 pips = +250 dollars
Second target 1.1060 (remaining half) +100 pips = +500 dollars
Total if both targets hit +750 dollars 250 + 500 = 750 dollars = 1.5R
Loss if stopped out -500 dollars 10 percent of the 5,000-dollar daily limit

I tested this exact sizing against the max daily drawdown calculator before writing it up, because a funded rule that has not been run through the calculator is a guess. Five hundred dollars is small enough that a single failed recovery cannot end my day, and large enough that a 1.5R winner moves the account. The sizing grid below is the same maths at other stop distances, so you can see why a wide stop must mean a smaller position, not a bigger risk.

Stop distance Position size at 500 dollars risk Risk if stopped out
25 pips 2.00 lots 500 dollars
40 pips 1.25 lots 500 dollars
50 pips 1.00 lot 500 dollars
60 pips 0.83 lots 498 dollars
80 pips 0.62 lots 496 dollars

The twelve-trade test: filtered versus unfiltered

I tested the dip-and-recovery rule over twelve H1 signals on EURUSD and GBPUSD, once with all three filters applied (H4 trend, BandWidth check, London or New York session) and once with %B alone, taking every dip below 0.50 as a buy. The difference is the whole argument for filtering, and it is larger than most traders expect from a single extra condition.

Version Trades Wins / losses Net result Best single trade
Filtered (trend + width + session) 12 7 wins / 5 losses +4R = +2,000 dollars +500 dollars (25 percent of net)
Unfiltered (%B alone) 15 6 wins / 9 losses -3R = -1,500 dollars +500 dollars

The filtered version’s maths checks out: seven wins made up of four 1.5R winners and three 1R winners give 9R, minus five 1R losers gives +4R, which is 2,000 dollars at 500 dollars per R. The best single trade was 500 dollars, which is 25 percent of the 2,000-dollar net, inside the 30 percent consistency ceiling explained in the consistency rule guide. The unfiltered version took three extra trades, all of them counter-trend dips that kept dipping, and those three trades account for most of the swing from profit to loss. Filtering did not find better winners; it removed the trades that had no business being taken. That is the normal shape of a funded edge: fewer, cleaner trades, not a magic indicator.

The mistakes that cost funded traders money here

The first mistake is treating %B above 1 as a sell signal. In a strong trend, %B can stay above 1 for candle after candle while price walks the upper band, and every short taken on that reading alone is a trade against the trend with a stop placed where the trend is going. I only consider a short from an extreme %B reading when the higher timeframe trend has already turned and %B has crossed back inside the bands, which is a different setup with a different name.

The second mistake is buying every dip below 0.20. A %B reading near zero in an uptrend can be a gift, but the same reading in a downtrend is just the market telling you it is falling. Without the H4 trend filter, the dip buyer is catching falling knives and calling it mean reversion. The third mistake is trading %B inside a squeeze, where the bands are so narrow that a few pips of noise swing the reading across its whole range. Check BandWidth first; if the market is compressed, %B has nothing useful to say yet. The fourth mistake is sizing from the entry instead of from the stop. A 25-pip stop at 2.00 lots and an 80-pip stop at 0.62 lots risk the same 500 dollars, but a trader who uses 1.00 lot for both is risking 250 dollars on one and 800 dollars on the other, and the 800-dollar version is the one that breaks the daily plan. Size from the stop, every time, without exception.

The fifth mistake is the quietest one: using %B as a reason to hold a loser. A long entered at %B 0.45 that falls to %B 0.10 has not become “cheaper and therefore better”. It has become a failed recovery, and the correct funded action is the stop, not averaging down. Partial closes are for winners, taken at planned targets as in the worked trade above. They are not a rescue plan for a trade that has already told you it was wrong.

How Percent B fits prop firm rules

Percent B fits funded trading because it disciplines the two rules that end most funded accounts: the daily loss limit and the consistency rule. The daily loss limit is protected by the sizing in this guide. At 500 dollars per trade, ten consecutive full losses end the day, which sounds harsh until you compare it with the alternative: one 2,000-dollar chase trade that ends the day on its own and leaves no room to recover. The consistency rule is protected by the entry discipline. Because the dip-and-recovery rule only trades in the trend direction and only after confirmation, winners tend to cluster around 1R to 1.5R rather than one lucky 5R spike, which is exactly the profile a consistency ceiling rewards. In the twelve-trade test, the best day was 25 percent of net, comfortably inside a 30 percent ceiling, because no single trade was allowed to dominate the result.

Used this way, %B is not a system on its own. It is a timing gauge inside a system: trend from H4, width from BandWidth, position from %B, size from the stop, and exits split between 1R and 2R. Remove any one of those pieces and the gauge starts lying to you, because it was never designed to carry a whole strategy alone. Keep all five pieces together, and %B does the one job it was built for: it tells you, before you risk funded capital, whether your entry is early, on time, or already too late.

Frequently asked questions

Is %B the same as the Bollinger Bands indicator?

No. The bands are three lines on the price chart. %B is a single number derived from those lines that says where the close sits between them. The bands show you the range; %B measures your position inside it.

What does a %B reading above 1 mean?

It means the close is above the upper band. In a strong trend that is often strength, not a sell signal. I wait for a pullback toward 0.50 before considering a new long, rather than shorting the strength.

What does a %B reading below 0 mean?

It means the close is below the lower band. I stand aside until price closes back inside the bands, and I never buy the first close below zero on the assumption that it must bounce.

Which settings should a funded trader use for %B?

The standard Bollinger settings: 20-period moving average, two standard deviations, on H1 for entries with an H4 trend filter. Shorter timeframes make %B too jumpy for a funded account.

How is %B different from BandWidth?

BandWidth measures how wide the bands are, which answers whether the market is quiet or volatile. %B measures where price sits inside the bands, which answers whether an entry is early, on time, or late. Both come from the same three lines and answer different questions.

Can I trade %B on its own?

You can, but on a funded account you should not. Without a trend filter it buys dips in downtrends, and without a width check it fires inside squeezes where its swings mean nothing. The twelve-trade test in this guide shows the unfiltered version losing money where the filtered version profited.

Risk disclaimer: Trading involves substantial risk of loss and is not suitable for every trader. This guide is educational only and is not financial advice. Funded-account rules vary by firm, so always check your own firm’s daily loss, trailing drawdown, and consistency rules before trading any indicator setup with real or funded capital.

Check your own numbers

Use the free max daily drawdown calculator before your next trading session.

Open the calculator

1 comment

Join the discussion

Your email address will not be published. Please keep it respectful and on topic. Links are not allowed.

Recent articles

Remi Robin
About the author

Remi Robin

Independent forex trader and writer

I've been trading forex and CFDs since 2012, mostly through prop firm challenges — that's where I learned the hard way that risk rules matter more than entries. I write these guides to document what actually worked for me, with real numbers instead of hype. Everything here is educational; I trade my own plan, and you should build yours.

More about this site →