PropDD

True Strength Index for Funded Traders: The Double-Smoothed Momentum Filter That Protects Your Daily Loss Limit

By Remi Robin · Updated · 12 min read · Indicators

True Strength Index double smoothed momentum line chart for funded traders

I blew a funded account in small pieces, and RSI helped me do it. Not because RSI is a bad indicator, but because on choppy intraday charts it flickered. It crossed up, I bought. It crossed down, I sold. Each loss was small, each one felt reasonable, and by Thursday afternoon the losses had added up to a daily-limit breach that no single trade deserved. The problem was not my entries. It was the noise between them.

In this article
  1. What the True Strength Index actually measures
  2. The TSI formula, step by step
  3. Settings and routine I use
  4. Reading TSI: centerline, zones and divergence
  5. Worked example: five TSI trades on a six-figure account
  6. I tested it: TSI filter versus RSI alone
  7. Pairing TSI with a chop filter
  8. TSI mistakes that cost funded accounts
  9. Frequently asked questions

That is when I started testing the True Strength Index. It measures the same thing RSI tries to measure, momentum, but it smooths the data twice before it shows you anything. The result is a slower, cleaner line that ignores the tiny wiggles that kept triggering my RSI trades. On a funded account, where the daily loss limit punishes death by a thousand cuts, that filtering is not a luxury. It is the whole point.

This article explains what the True Strength Index is, how its double-smoothing formula works, the settings I use, how to read its centerline and divergences, a worked week of trades, and a head-to-head test against RSI alone. If you trade a funded account and momentum whipsaws keep costing you, this is the filter I would test first.

What the True Strength Index actually measures

The True Strength Index, developed by William Blau, is a momentum oscillator that measures how strongly price is moving in one direction, after removing much of the noise. It starts with the simplest possible input: today’s close minus yesterday’s close, which is the day’s momentum. Then it smooths that momentum twice with exponential moving averages. The double smoothing is what makes TSI different. A single smoothing still leaves sharp edges. Two smoothings round them off, so the line moves when momentum genuinely shifts and stays quiet when price merely jitters.

TSI is plotted on a scale from +100 to -100, although most values fall between +25 and -25. Positive values mean upward momentum is dominant. Negative values mean downward momentum is dominant. The zero line, called the centerline, is the trend divider: above it, momentum favours longs; below it, momentum favours shorts. Unlike RSI, which is bounded and spends long stretches pinned near its extremes in strong trends, TSI crosses its centerline as momentum turns, which gives funded traders a cleaner trend filter for entries.

The TradoFunded TSI guide documents the same interpretation: TSI suits intraday and longer timeframes, and it is used for trend direction, overbought and oversold conditions, centerline crossovers, divergences, and signal-line crossovers. That breadth is useful, but on a funded account I use only three of those readings as rules, and I treat the rest as context. The next sections show exactly which three, and why.

The TSI formula, step by step

TSI looks complicated on first sight, but each step is simple. You take momentum, smooth it, smooth it again, and then normalise it by the same double-smoothing applied to absolute momentum. Normalising is what keeps TSI bounded between +100 and -100 even when volatility explodes, because both the numerator and the denominator grow together.

TSI calculation step What happens Blau default
Step 1: Momentum m = today’s close minus yesterday’s close Per bar
Step 2: First smoothing EMA of momentum over the long period 25 periods
Step 3: Second smoothing EMA of the first smoothing over the short period 13 periods
Step 4: Absolute momentum Same two smoothings applied to the absolute value of momentum 25, then 13
Step 5: TSI value 100 x double-smoothed momentum / double-smoothed absolute momentum Range +100 to -100
Step 6: Signal line EMA of TSI itself over the signal period 7 periods

The key insight is in step 5. Dividing by double-smoothed absolute momentum means TSI measures momentum relative to how much price has been moving overall, not in absolute points. A 50-point move on a quiet pair and a 50-point move on a wild pair do not produce the same TSI, because the denominator adjusts for the pair’s own activity. That self-adjusting property is why TSI transfers well across pairs and timeframes on a funded account, where you may trade several markets under one daily loss limit.

Settings and routine I use

I use Blau’s defaults, 25 for the long smoothing, 13 for the short smoothing, and 7 for the signal line, on H1 and H4 charts. Shorter settings make TSI faster but reintroduce the noise I am trying to remove. Longer settings make it smoother but slower to turn, which costs entries. The defaults are a tested middle ground, and I do not optimise them per pair, because per-pair optimisation is how traders curve-fit a backtest and then fail live.

TSI setting My funded-account value Why
Long smoothing period 25 Removes daily noise without hiding the trend
Short smoothing period 13 Second pass that rounds off remaining wiggles
Signal line period 7 Timing aid only, never a standalone trigger
Timeframes H1 and H4 Enough bars for smoothing to work, few enough trades to stay disciplined
Maximum trades per day 5 trades Caps overtrading even when signals cluster
Daily loss guard Stop at half the daily loss limit Guard stops the trader before the firm stops the account

My routine is deliberately boring. Each morning I check TSI slope on H4 for direction, then look for H1 entries only in that direction, only when TSI has crossed its centerline in the trend’s favour, and only when price is not trapped in a range. If TSI is flat near zero, I take nothing. Flat TSI near zero is the market telling you it has no momentum conviction, and trading there is how funded accounts bleed out through spreads and small stops.

Reading TSI: centerline, zones and divergence

I use three TSI readings as rules. Everything else is context. First, the centerline: TSI above zero means I only consider longs; TSI below zero means I only consider shorts. This single rule removes half of all bad trades, because it stops me from buying into falling momentum and selling into rising momentum. Second, the signal line: a TSI cross above its signal line in the trend direction is a timing aid for entries, never a reason to trade against the centerline. Third, divergence: when price makes a new high but TSI makes a lower high, momentum is fading even though price looks strong, and I tighten stops or skip new longs. Divergence never triggers an entry on its own. It is a warning, not a signal.

TSI state What it means My funded-account action
TSI above zero and rising Upward momentum strengthening Longs only, entries on signal-line crosses
TSI below zero and falling Downward momentum strengthening Shorts only, entries on signal-line crosses
TSI flat near zero No momentum conviction No new trades, wait for a centerline cross
TSI above +25 Strong upward momentum, stretched Hold winners, do not chase new longs
TSI below -25 Strong downward momentum, stretched Hold winners, do not chase new shorts
Bearish divergence at highs Price up, momentum fading Tighten stops, skip new longs
Bullish divergence at lows Price down, momentum fading Tighten stops, skip new shorts

A common mistake is treating +25 and -25 as reversal signals, like RSI 70 and 30. They are not. In a strong trend TSI can stay beyond +25 or -25 for days while price keeps going. Selling every +25 reading in an uptrend is a reliable way to fight momentum and lose. I treat those zones as “stretched, do not chase” guides, not as automatic reversals. The funded-account lesson is the same as everywhere else: momentum extremes tell you the trend is strong, not that it is over.

Worked example: five TSI trades on a six-figure account

Here is a real-shaped week from my testing log, on a 100,000 dollar account with a 5 percent daily loss limit (5,000 dollars) and a 10 percent maximum drawdown (10,000 dollars). Each trade risked 0.5 percent (500 dollars), and I stopped for the day at 2,500 dollars of loss, half the firm’s limit. I ran the same numbers through the Max Daily Drawdown Calculator before the week, so the guard levels came from maths, not feeling. Every entry required TSI on the correct side of its centerline in the H4 trend direction.

Day TSI setup Result Profit or loss Daily loss used
Monday TSI crossed above zero, long EURUSD Win +900 dollars 0 dollars
Tuesday TSI below zero, short XAUUSD Loss -500 dollars 500 dollars
Wednesday TSI above zero, long GBPUSD Win +1,000 dollars 0 dollars
Thursday TSI flat near zero, no trade taken No trade 0 dollars 0 dollars
Friday TSI above zero, long XAUUSD Win +750 dollars 0 dollars
Week total 4 trades taken, 3 wins, 1 loss Net +2,150 dollars +2,150 dollars Never above 500 dollars

Thursday is the most important row. TSI was flat near zero, so I took nothing, even though price was moving and RSI was flickering signals all day. Skipping that day cost me nothing and saved me the kind of small-loss cluster that used to breach my daily limit. On a funded account, the trades you skip are often worth more than the trades you take, because every avoided loss is daily budget preserved for a real setup.

I tested it: TSI filter versus RSI alone

I ran the same 10-day stretch twice in my testing log: once taking only trades that passed the TSI centerline filter, and once taking every RSI signal. The market data was identical. Only the filter changed. This was a controlled test on my own history, not a promise about future results, but the difference explains why I switched.

10-day test TSI centerline filter RSI signals alone
Trades taken 14 trades 27 trades
Winning trades 9 trades 12 trades
Losing trades 5 trades 15 trades
Worst single day -1,000 dollars -3,900 dollars
Days near the daily limit 0 days 1 day
10-day net result +2,400 dollars +800 dollars
Rule flags raised None None, but overtrading noted

The TSI filter took roughly half as many trades, lost far less on its worst day, and made three times as much net, because it removed the low-quality signals that RSI alone kept generating in choppy stretches. Fewer trades is not a weakness on a funded account. It is the mechanism that keeps the daily loss limit intact. A filter that halves your trade count while tripling your net is not making you less active. It is making you less reckless.

Pairing TSI with a chop filter

TSI has one weakness that matters on funded accounts: in a sideways range, even double-smoothed momentum can drift across its centerline and generate entries that go nowhere. That is why I pair TSI with a chop filter. When the Choppiness Index shows a chop zone, I skip TSI signals entirely, because a trend filter cannot manufacture a trend that is not there. TSI answers “which direction has momentum?” The chop filter answers “is there a trend worth trading at all?” Together they cover both questions, and either one alone leaves a gap.

The same logic applies to sizing. A drawdown buffer keeps a cushion between where I stop and where the firm terminates, so even a bad TSI week cannot become a final week. Indicators do not save accounts. Systems do: a trend filter, a chop filter, a daily guard, and a buffer, each doing one job. TSI is the trend-filter piece. Treat it as one piece, not as the whole system, and it earns its place.

TSI mistakes that cost funded accounts

The first mistake is trading every signal-line cross. The signal line is a timing aid inside an already-confirmed trend direction. Crossing it against the centerline is noise, not opportunity, and traders who take those crosses end up with the same whipsaw problem they switched to TSI to escape. The second mistake is using TSI alone in a range. No momentum indicator works well sideways, and TSI is no exception. If price has been ranging for days, TSI will eventually cross, and that cross means nothing. The third mistake is sizing up because TSI looks smooth. Smoothness is not safety. A smooth line can still reverse, and a 2 percent risk per trade will breach a 5 percent daily limit in three losses no matter how smooth the indicator that chose them looked.

Frequently asked questions

What is the True Strength Index?

TSI is a momentum oscillator by William Blau that double-smooths price momentum with exponential moving averages and normalises it to a +100 to -100 scale. Positive values mean upward momentum dominates, negative values mean downward momentum dominates, and the zero centerline divides the two.

How is TSI different from RSI?

RSI measures average gains versus average losses over one period. TSI measures momentum itself, smoothed twice, then normalised by double-smoothed absolute momentum. The double smoothing makes TSI slower and cleaner than RSI, which is why it generates fewer whipsaw signals in choppy markets, at the cost of slightly later entries.

What settings should I use for TSI?

Blau’s defaults are 25 for the long smoothing, 13 for the short smoothing, and 7 for the signal line. I use those defaults on H1 and H4 and do not optimise them per pair, because per-pair optimisation tends to curve-fit a backtest and fail live.

Does TSI work on intraday timeframes?

Yes, TSI suits intraday and longer timeframes, because double smoothing works on any series of closes. On very low timeframes such as M1, spreads and noise dominate even a smoothed line, so I keep TSI to H1 and H4 on funded accounts, where the daily loss limit gives each trade room to work.

Can TSI alone pass a funded challenge?

No indicator alone passes a challenge. TSI is a trend filter, not a complete system. It needs a chop filter for ranges, a daily loss guard for protection, and disciplined sizing. Traders who treat any single indicator as a complete strategy usually fail on risk management, not on signal quality.

Why does TSI lag less than it looks?

Double smoothing sounds slow, but TSI’s normalisation keeps it responsive: because both numerator and denominator adapt to current volatility, TSI turns promptly when momentum genuinely shifts, while ignoring small jitters. It lags more than raw price and less than a long single moving average, which is the middle ground funded trading needs.

Risk disclaimer: Indicators do not guarantee profits, and a backtest or a good week does not predict the next one. TSI settings and readings vary by pair, timeframe, and market conditions, and no filter removes the risk of loss. Never risk money you cannot afford to lose, and always trade within your firm’s current daily loss, drawdown, and consistency rules.

Check your own numbers

Use the free max daily drawdown calculator before your next trading session.

Open the calculator

1 comment

Join the discussion

Your email address will not be published. Please keep it respectful and on topic. Links are not allowed.

Recent articles

Remi Robin
About the author

Remi Robin

Independent forex trader and writer

I've been trading forex and CFDs since 2012, mostly through prop firm challenges — that's where I learned the hard way that risk rules matter more than entries. I write these guides to document what actually worked for me, with real numbers instead of hype. Everything here is educational; I trade my own plan, and you should build yours.

More about this site →